OWNER'S MANUAL DVD Receiver System Please read this manual carefully before operating your set and retain it for future reference. MODEL MDD64 (MDD64-A0U, MDS64V) MDD104 (MDD104-A0U, MDS104V) MDT354 (MDT354-A0U, MDS354V/W) RDD264 (RDD264-A0U, RDS264V) P/NO : MFL42956184 MDD64-A0U_BPHLLL ENG 6184.
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents Safety Precaution Contents Setting up Hooking up the unit Main unit Remote control OSD Initial language setting - Optional Initial Setting the Area Code Adjust the general settings Setting the sound mode Enjoying a pre-programmed sound field Setting the clock 2 3 4 5 6 7 8 8 8-10 10 11 11 Recording to USB Recording to TAPE Synchronized Recording from CD to Tape 17 18 18 Language Codes Area Codes Troubleshooting Types of Playable Discs Specifications 19 19 20 21 22 Displaying Disc Information
Setting up Attaching the speakers to the unit Connect the black end of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). To connect the cable to the each speakers, press each plastic finger pad to open the connection terminals on the back of each speaker. Insert the wire and release the finger pad. Be careful of the following •B e careful to make sure children not to put their hands or any objects into the *speaker duct.
Hooking up the unit VIDEO OUT jack connection Connect the VIDEO OUT jack on the unit to the corresponding input jacks on your TV using a Video cable. COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks connection Connect one end of the component (Y PB PR) cable to the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jack on the unit and other end to the COMPONENT INPUT jack on your TV. Antenna connection Fit the AM loop aerial to its stand Connect the AM loop aerial to the unit.
Main unit 12 Z OPEN/CLOSE: Open or close your CD door. 13 D ISC SKIP 1 Disc tray 2 1/\ STANDBY/ON 3 D isplay window 4 C LOCK 5 T IMER 6 U SER EQ Choose a desired disc. 2 3 4 5 8 SET Confirms the settings. 6 (TIMER/ CLOCK) CD II Pauses PRESET(-) .m TUNING(-) USB Selects USB function. DEMO In power off state to demonstrate the function on display window. To cancel it, press 1/\ or this button again. You can choose fixed sound impression 1 7 S elects DVD/CD function.
Remote control 1 1 POWER: Switches the unit ON or OFF. FUNCTION: Changes the function. SLEEP: Sets the System to turn off automatically at a specified time. (Dimmer : Dims the LED (Light-emitting diode) of front panel by half in power-on status.) Z OPEN/CLOSE: Open or close your CD door. TITLE: If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear. DISPLAY: Accesses On-Screen Display. MENU: Accesses the menu on a DVD disc.
OSD Initial language setting - Optional During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language.
Adjust the display settings TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode – I f you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen.
Adjust the lock settings To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers then correct it. If you forget your password you can reset it. Press SETUP and Input ‘210499’ and press ENTER. The password has now been cleared. Rating – S elect a rating level. The lower the level, the stricter the rating.
Enjoying a pre-programmed sound field The system has a number of pre-set surround sound fields. You can select a desired sound mode by using EQ/ LG EQ. The displayed items for the Equalizer may be different depending on sound sources and effects. ON DISPLAY NATURAL Local Specialization equalizer AUTO EQ POP CLASSIC JAZZ ROCK MP3 OPT XDSS ON VIRTUAL NORMAL(OFF) Description You can enjoy comfortable and natural sound. Regionally optimized sound effect.
Displaying Disc Information Playing a Disc ON REMOTE 1 Press DISPLAY 1 Open the disc tray 2 Select an item Uu 2 Insert a disc 3 Adjust the Display menu settings Ii 3 Close the disc tray 4 To return the exit DISPLAY 4 To Start playback Displaying Disc Information - More you can do You can select an item by pressing U u and change or select the setting by pressing I i.
1.5 times faster playback DVD 1 Press B when a disc is already playing to watch and listen. 2 B x1.5 will appear on the screen. 3 Press B again to return to normal playback speed. Slow down the playing speed DVD 1 While playback is paused, press m/M. 2 You can change the various playback speed by pressing m/M repeatedly. 3 Press B to continue play at normal speed. Starting play from selected time DVD DivX Searches for the starting point of entered time code. 1 Press DISPLAY then select clock icon.
Creating your own program WMA MP3 ACD You can play the contents of a disc in the order you want by arranging the order of the songs on the disc. The program is cleared when the disc is removed. 1 Select a desired music then press PROG./MEMO. or select “ ” and then press ENTER to add the music to the program list. 2 To add all music in the disc, select “ ” and then press ENTER. 3 Select a music from the program list then press ENTER to start programmed playback.
Listening to the cassette tapes Listening to the radio 1 Select FM/ AM 2 Select the radio station ON UNIT ON REMOTE TUNER FUNCTION TUNING(-/+) 3 T o ‘save’ a radio station A preset number will show in the display. 4 Select the preset number PRESET(-/+) 5 T o confirm press Up to 50 radio stations can be saved 6 T o select a ‘saved’ station press TUN. +/PROG./MEMO. PRESET U u PROG./MEMO.
Using an USB device Listening to music from your external device The unit can be used to play the music from many types of external device. ON UNIT ON REMOTE 1 C onnect the external device to the AUX connector of the unit. > If your TV has only one output for audio(MONO), connect it to the left(white) audio jack on the unit. Your unit You can enjoy media files saved on an USB device by connecting the USB device to the USB port of the unit.
When you are recording, look out for the following Recording to USB You can record a various sound source to USB. 1 Connect the USB device to the unit. 2 S elect a mode in which you want to record. (TUNER/ CD/ ....) Play back a sound source first. 3 Start the recording. > If you press the button on the remote control, the display changed in the following order, “USB REC” <-> “TAPE REC”. Then press the button on “USB REC” once more. 4 To stop recording, press ON PLAYER ON REMOTE TUNER/TAPE/...
Recording to TAPE You can record a various sound source to TAPE. ON UNIT 1 Open the tape deck. > There are 2 tape decks on the unit, open the second one. 2 Insert a blank tape and close the door. 3 Select a mode in which you want to record. 4 Play back a sound source first. 5 Press >T he display changed in the following order, “USB REC” <-> “TAPE REC” 6 Press the button once more when “TAPE REC” is displayed. > Recording starts. 7 To stop recording, press ON REMOTE PUSH EJECT TUNER/USB/...
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Symptom POWER No power RADIO No sound Some noise occurs. Cause Correction The power cord is not plugged in. Plug in the power cord. The function switch is not set to the Radio mode. There are electronic devices near the unit. Set the switch to the Radio mode. The antenna is positioned or connected poorly Check the antenna connection and adjust its position n unplayable disc is inserted. A The disc is placed upside down. The disc is not placed within the guide.
About the x Symbol Display Types of Playable Discs Type DVD-VIDEO: Discs such as movies that can be purchased or rented. Logo “ x ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc. Regional code DVD-R: Video mode and finalized only This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.
Specifications General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Bus Power Suply (USB) Refer to main label. Refer to main label. MDD64: 5.4 kg MDD104: 5.5 kg MDT354: 5.8 kg 274 x 334 x 344 mm Temperature: 5 °C to 35 °C, Operation status: Horizontal 5 % to 85 % DC 5 V 500 mA RDD264: 5.7 kg Tuner FM Tuning Range Intermediate Frequency AM Tuning Range Intermediate Frequency 87.5 to 108.0 MHz or 87.50 to 108.
MDD64-A0U_BPHLLL ENG 6184.
MDD64-A0U_BPHLLL ENG 6184.
