MDD112_72-A0U_ENG_GF MDD112 (MDD112-A/D/X0U, MDS112V) MDD72 (MDD72-A/D/X0U, MDS72V) English Mini Home Theater Read the manual carefully before using the unit.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Introduction Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 5 5 Operation Operate using the front Panel . . . . . . . . . . . . . . . . . . 5 Operate using the Remote Control . . . . . . . . . . . . . . 6 Additional features. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Caution Indicates hazards likely to cause harm to the unit itself or other material damage.
Installation Rear of TV VIDEO IN FOR AM(MW) reception,connect the loop antenna (aerial) to the terminal marked AM COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y V C FM wire antenna (supplied) To AUDIO IN IN VCR (or Auxiliary Device.etc) OUT VIDEO AUDIO (L) AUDIO (R) To AUDIO OUT TV Connection T ip • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below.
Speaker System Connection Connect the speaker wires the speaker terminals. Note • Be sure to match the speaker wires to the appropriate terminal on the components, + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. • If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. ENGLISH Optional Equipment Connection You can use VCR or other unit connected to the AUX connector.
Operate using the Remote Control POWER 5. SETUP D.SKIP 22 1 TUNER/BAND 2 DVD AUX USB SLEEP 21 3 DIMMER 20 4 v/V V) • PRESET -/+ (v Press PRESET +/- repeatedly to select the preset station you want. Each time you press the button, the unit tunes in one preset station at a time. Preset radio stations in the unit’s memory first (see “Presetting radio stations”) • TUN.(-/+) (b/B) For manual tuning, press TUN (-/+) repeatedly For automatic tuning, press and hold TUN.
-You can select a desired sound mode by using EQ button on the front panel or the remote control. When you want to change a sound mode press the EQ button repeatedly within 3 seconds. Each time you press the button the setting changes in the display window as shown below. NORMAL → ARABIC → USER EQ → POP → CLASSIC → ROCK → DRAMA → JAZZ → NORMAL... You can set the BASS, MIDDLE and TREBLE on the USER EQ mode. 1.Select the USER EQ mode by using EQ button.“USER EQ” will be displayed in the display window. 2.
• VSM (Virtual Sound Matrix) Press VSM to set the VIRTUAL sound. Source 2.1 ch. 5.1 ch Display VIRTUAL VIRTUAL Effect 3D STEREO Virtual surround 3D STEREO Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. Virtual surround A patent pending downmix technology converts 5.1 channel to 2 channel sound having directional information of audio.
System Select This function dims the LED (Light-emitting diode) of front panel by half in power-on status. Press DIMMER once. The LED (Light-emitting diode) of front panel is turned off and the display window will be darken by half.To cancel it, press DIMMER again. 21. SLEEP You must select an appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE/STEP remote control for more than 5 seconds to be able to select a system (PAL, NTSC or AUTO).
Setup Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, read the page 9 to 11 Original – Refers to the original language in which the disc was recorded. Other – To select another language, press numeric buttons and then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list on the page 18.
Each DVD disc has a variety of audio output options. Set the unit’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD*1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones).
Playing an Audio CD or MP3/WMA/JPEG/DivX file Playing an Audio CD or MP3/WMA file 2. Press REPEAT to select a desired repeat mode. • TRACK: repeats the current track • ALL: repeats all the tracks on programmed list. This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert a cd with MP3/WMA files or Audio, a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or SELECT/ENTER, and playback starts. You can use variable playback functions.
Press (. or >) once during viewing a picture to advance to the next or previous file. Rotating the picture Press v /V /b /B during showing a picture to rotate the picture clockwise or counter-clockwise. 3. If you want to view a particular file, press v / V to highlight a file and press SELECT/ENTER or PLAY. 4. Press STOP to exit. T ip Zoom Each time ZOOM is pressed the setting changes in the following order. Zoom on y Zoom off Press MENU to move to the next page.
Presetting the Radio Stations / Listening Presetting the radio stations Listening to the radio You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned the volume down to the minimum level. 1 Press TUNER/BAND on the remote control to show either FM or AM in the display window. Or Press TUNER on the front panel. The last received station is tuned in. 2 Press v /Von the remote control repeatedly to select the preset station you want.
RDS Operation - Optional RDS TUNING When a FM station is tuned in and it contains RDS data, the unit will automatically display the station’s call sign and the RDS indicator will light in the Display Window as well as indicators for the RDS services programme (PS), programme type recognition (PTY), Radio text (RT) and Clock Time (CT) if transmitted by the station.
Timer function Setting the Clock 3) Select the previous memorized preset BB > on the number by pressing . bb/B front panel and press SET/CD[[ . ‘ON TIME’ indicator appears for about 0.5 seconds in the display window and then disappears. 1 Press CLOCK. (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) - The hours display begins to blink. 2 Select a 24 hour cycle or 12 hour cycle by BB > on the front panel. pressing .
Basic Playback Basic Setting 1 1 2 3 Press TAPE1-2 (or TAPE) to select tape function. (“NO TAPE ” appears in the display window.) Open cassette TAPE1-2 by pushing to the PUSH EJECT position. Insert one or two cassettes with the tape side to the bottom and then close the TAPE 1 (and/or 2) door. 2 Select a function you want to record except tape function. Open the cassette deck TAPE 2 and insert a blank cassette into the cassette compartment.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Ca A menu is on the TV screen. Check the following guide for the possible cause of a problem before contacting service. Co Press the SETUP button to turn off the menu screen. Symptom/ Ca Cause/ Co Correction Sy No power. Ca The power cord is disconnected. Co Plug the power cord securely into the wall outlet. Sy The power is on, but the unit does not work. Ca The Rating level is set. Co Cancel the Rating function or change the rating level.
Specifications General Power supply Power consumption Net Weight Refer to the main label. Refer to the main label. 5.5 kg External dimensions (W x H x D) 272 X 322 X 354 mm Tuner/Amplifier FM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response AM Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Output Power T.H.D Frequency Response Signal-to-noise ratio 87.5 - 108.0 MHz or 65 -74 MHz, 87.5 -108.0 MHz 10.
