Owner's Manual

ESU EROFEB
SETTING CLOCK
when power resumes after a power interruption,
the numbers in the display reset to '12H'.
Example: To set 11:11 .
1. Press START
12Hr clock display. (If you
wish to have a 24Hr clock
display, simply turn the DIAL
to select ’24H’ before following
next steps)
2. Turn the DIAL until display
shows ’11:’.
3. Press START.
4. Turn the DIAL to change the
minutes until the display shows
‘11:11’.
5. Press START.
MORE/LESS
By turning the Dial, TIMED COOK program can
be adjusted to cook food for a longer or shorter
time. Turning the dial will increase 10 seconds or
decrease 10 seconds to the cooking time each
time. The max time possible will be 99 min 59 sec.
Example:To adjust the Inverter Cook
(ex. 0.3kg chicken nuggets) cooking time for a longer time,
or for a shorter time.
1. Press STOP/CANCEL.
2. Press INVERTER COOK
until display shows ‘1’.
. Press START.
3. Turn the DIAL until display
shows ‘1-3’.
Turn the DIAL until display
shows ‘0.3 kg’.
. Press START.
. Turn the DIAL.
The cooking time will
increase or decrease
by 10 seconds.
ENERGY SAVING
Energy saving means save energy by turning off
the display. This feature only operates when the
Microwave Oven standby and the display will go out.
NOTE
If you find that your food is over or undercooked
when using the preset COOK program, you can
increase or decrease the cooking time by turning
the
DIAL
.
You can lengthen or shorten the cooking time
(except defrost mode) at any point turning the
DIAL
.
The QUICK START feature allows you to set 30
seconds intervals of HIGH power cooking with
a touch of the START.
Example: Set 2 minutes of cooking on high
power
Select 2 minutes
on
high power.
Press the START button four times
The oven will start before you have finished
the fourth press.
During QUICK START cooking, you can extend
the cooking time up to 99 minutes 59 seconds by
repeatedly pressing the START button.
QUICK START
1.
2.
Press STOP/CANCEL.
NOTE
When using clock mode, the display will remain on.
12
NOTE
If you don’t want to use clock mode,
Press STOP button, after plugging in your oven.
If you want to set the clock again or change options,
you will need to unplug the power cord and reconnect.
the