Owner's Manual

17
BEFORE USE
SETTING THE CLOCK
when power resumes after a power interruption,
the numbers in the display reset to '12H'.
Example: To set 11:11 .
1. Press START
the 12H clock display. (If you
wish to have a 24H clock
display, simply turn the DIAL
to select ’24H’ before following
next steps)
2. Turn the DIAL until display
shows ’11:’.
3. Press START.
4. Turn the DIAL to change the
minutes until the display shows
‘11:11’.
5. Press START.
MORE/LESS
By turning the dial, manual cook settings can be
adjusted to cook food for a longer or shorter time.
Turning the dial will increase 10 seconds or decrease
10 seconds to the cooking time each time. The max
cooking time possible in the manual cook mode will be
99 minutes 59 seconds
Example:To adjust the Inverter Cook cooking time
for a longer time, or for a shorter time.
1. Press STOP/CANCEL.
2. Press INVERTER COOK
until display shows ‘1’.
5. Press START.
3. Turn the DIAL until display
shows ‘1-3’.
Turn the DIAL until display
shows ‘0.3 kg’.
4. Press START.
6. Turn the Dial to lengthen or
shorten the cooking time by
10 second increments.
ENERGY SAVING
Energy saving means saving energy by automatically
turning off the display. This feature only operates when
the Microwave Oven is in standby and the display will
automatically go out.
NOTE
If you suspect that your food maybe over or
undercooked when using the preset COOK program,
you can increase or decrease the cooking time by
turning the DIAL.
You can lengthen or shorten the cooking time
(except defrost mode) at any point by turning the
DIAL
.
The QUICK START feature allows you to set 30
seconds intervals of HIGH power cooking with
each touch of the START button.
Example: Set 2 minutes of cooking on high
power
To select 2 minutes
on
high power.
Press the START button four times The oven will
start before you have finished the fourth press.
During QUICK START cooking, you can extend
the cooking time up to 99 minutes 59 seconds by
repeatedly pressing the START button.
QUICK START
1.
2.
Press STOP/CANCEL.
NOTE
If the clock has been set, the Energy saving mode
will not operate. The Energy saving mode will only
operate if the clock was not set.
NOTE
If you don’t want to use clock mode,
Press STOP/CANCEL button, after plugging in your oven.
If you want to set the clock again or change options,
you will need to unplug the power cord and reconnect.