Owner's Manual

VCR
operation
Pressing
the FF
ΓΓ
button in the
stop
mode winds the
tape
for-
ward at
high speed.
Then the
display
will
appear
on the screen.
If
you press
and hold the FF
ΓΓ
button in this
mode,
the search-
ing picture
will
appear.
This enables
you
to see what is on the
tape.
To return to the FF
mode,
release the FF
ΓΓ
button.
If the
tape
winds forward to the
end,
it will
automatically stop,
rewind to the
beginning
and then
eject
the
tape.
Reverse search
Press the
ΦΦ
REW button
during playback.
The
display
will
appear
and the
tape
will
play
in reverse faster
than normal
speed.
Press the PLAY button to return to normal
play-
back.
Pressing
the
ΦΦ
REW button in the
stop
mode rewinds the
tape
backward at
high speed.
Then the
display
will
appear
on the
screen.
If
you press
and hold the
ΦΦ
REW button in this
mode,
the search-
ing picture
will
appear.
This enables
you
to see what is on the
tape.
To return to the REW
mode,
release the
ΦΦ
REW button.
Note
:
Sound is
automatically
muted
during
these
operations.
Clock/Count selection
Each time the CLK/COUNT button is
pressed,
the current time and
the
tape
counter
appears alternately.
The
tape
counter
displays
the
tape
travel time in
hours,
minutes
and seconds
during recording
and
playback.
Note
:
To reset the counter to
0:00:00,
press
the CLR/ RST button
when
displaying
the counter.
Memory stop
The
memory stop
makes it
easy
to return to a
particular spot
on the
tape
after
recording
or
playback.
The
tape automatically stops
when the counter reaches M
0:00:00.
1. Start
recording
or
playback.
2. Press the CLK/COUNT button 3times to
display tape
counter.
3. Press the CLR/RST button at the
point you
want to review. The
counter
displays
M
0:00:00.
4. Press the STOP button when
you
finish
recording
or
playing
the
tape.
5. Press the
ΦΦ
REW button to rewind the
tape.
The
tape stops
at the
point
M
0:00:00.
6. Press the PLAY button to
play
back the
tape.
VCR colour
system setting
You can
adjust
the VCR colour
system.
Under normal
circumstances,
select
AUTO.
If
necessary
(if
input signal
is
weak),
change
the colour
system by using
the instructions below.
1. Press the SYSTEM button. The
VCR
System
mode will
appear.
2.
Repeatedly press
the SYSTEM button to select the correct
sys-
tem.
Note
:
a. NTSC
PB
is for
playback
only.
You cannot record NTSC
signals.
b.
If
the
picture
is no colour
during playing
back a MESECAM
video cassette
tape
in
AUTO,
select MESECAM instead of
AUTO.
24
CLR/RST CLK/COUNT
SYSTEM
STOP
FF REW PLAY
Comm
PLAY
STOP
REW
FF
CLK/COUNT CLR/RST
SYSTEM
ΦΦ
ΦΦ
ΓΓ