Owner`s manual

Operating 51
Operating
3
[Advanced Settings] Menu
Mesh Network Channel
If normal playback or group playback is not smooth
using multiple speakers including wireless speaker
connection, changed the mesh network channel to
improve network speed.
1. Select the [Settings] -> [Advanced Settings]
option.
2. Select the [ Mesh Network Channel] option.
The channel information now being used is
displayed.
3. Select the channel to change.
4. The channel information is updated to the
selected channel.
y
The speaker is disconnected temporarily
during the channel changing.
y
If you changed the channel when the
speaker turned o, turn on and add it again.
y
If the speaker is not connected to network
after changing the channel, add the speaker
again.
,
Note
Auto Music Play
You can easily change the rendering device from
your smart device or a speaker to another speaker
by approaching your smart device to the desired
speaker.
y
Your smart device should support Bluetooth
Smart.
y
This function is subject to the smart device
capability and the Wi-Fi network status.
y
Auto music play option in the music ow app
should be turned on.
y
This function may cause more battery
consumption.
1. Turn on the [Auto Music Play] optio-n in the
Advanced settings menu on the music flow
app.
-
Place your smart device close enough to the
tag on the speaker. It is recommend to be
within about 2 inches.
-
Set the slide bar at [Close], the leftmost
position.
-
Move the slide to the right slowly until the
notication appears.
y
BLE support specications in case of android
can vary depending on the manufacturer.
Device O/S
Android Android 4.3 (or later)
Apple iOS 7.1 (or later)
,
Note