OWNER’S MANUAL DIGITAL SIGNAGE MEDIA PLAYER (Hardware) Please read this manual carefully before operating your set and retain it for future reference. DIGITAL SIGNAGE MEDIA PLAYER NC1000 NC1100 NA1000 NA1100 NC2000 NC2100 NA2000 NA2100 www.lgecommercial.com www.lg.
TABLE OF CONTENTS Licenses.............................................................................................................4 Replacing Flash Memory Battery.......................................................................4 NC1000 Specifications.....................................................................................................5 General Specifications................................................................................................... 5 Multi I/O Port.........
NC1100/NA1000/NA1100 Specifications...................................................................................................23 General Specifications................................................................................................. 23 Multi I/O Port................................................................................................................ 23 Operational Specifications...........................................................................................
Licenses Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Replacing Flash Memory Battery The flash memory battery helps maintain the system (BIOS) settings when the computer is powered off. The flash memory battery is a consumable part.
NC1000 Specifications Attention ●P roduct specifications may change without prior notice to improve performance. General Specifications Dimensions 250 mm (W) x 220 mm (H) x 45 mm (D) (only Set) Weight 1.43 kg (only Set) CPU Intel ATOM Processor 330 1.
Operational Specifications Resolution Power Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 100-240 V~ 50/60 Hz 1.
Included in the Box Basic Components The NC1000 with the following components. Please check that these components have been included prior to installation. NC1000 Owner's Manual / Cards Box Guide Power Cable RS-232C Cable Rail x 2 Handle x 2 (for attachment of handle) M3, L8 x 8 M3, L12 x 4 (for attachment of Box Guide on the monitor) Attention ● These illustrations may differ from your product and are subject to change. Note ●S uperSign software and manual.
Connections Back Panel A H Number D C B I J K E L Connection F G M E E Description A Power Cable In For the power cable. B Power Switch Provides power to the NC1000. C RS-232C Out For the RS-232C cable. D USB Wireless Modem In For a USB-type wireless modem. E USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. F HDMI Out For an HDMI-compatible monitor. G LAN Connector For a LAN cable.
Installation We recommend you to use the items provided with your NC1000 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention ● The illustrations shown are to guide your integration and may differ from your product. 1 Place the handle into the slots on the side of the product. 2 Use screws to secure the handle. 3 Place the rail in the slots on the side of the product. Warning ● Be careful of sharp edges on the rail and the handle.
4 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor. 5 Attach the Box Guide to the rail slots, and press it upward. 6 Use screws to secure the player and the Box Guide as shown below.
In/Out Cable Connection In order to watch video on a monitor, you need to use a D-sub cable or an HDMI cable to connect the NC1000 to a monitor. Attention ● D-sub, HDMI, LINE-OUT, OPTICAL, and LAN cables are not included with the NC1000. If the cables were not provided with your monitor, you may need to purchase them separately. ● After cabling is complete, assign the SET ID of the monitor to be connected to NC1000. ● To configure the SET ID, please refer to the owner’s manual for your monitor.
2 Connect the D-sub port of NC1000 and RGB-IN port of the monitor with a D-sub cable. 3 Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable.
4 Connect the NC1000 to the monitor with a LINE-OUT cable. 5 Connect a LAN cable to the NC1000.
Connecting a Monitor with an HDMI Cable HDMI connections allow digital video and audio signals to be transferred with one cable. HDMI cable connections do not require an additional audio in cable. Attention ● The monitor to connect with NC1000 should have the HDMI in for the HDMI connection. ● To use the HDMI device, you need to activate the HDMI device in Microsoft Windows Embedded Standard, the operating system of the NC1000.
3 Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable. 4 Connect a LAN cable to NC1000.
Connecting/Disconnecting HDMI Audio Device in Windows Connecting HDMI Audio Device Move to the desktop of the monitor connected to the NC1000. 1 Click the 2 Select Start > Control Panel > Sounds and Audio Devices > Audio. 3 Select Play Sounds > NVIDIA High Definition Audio from the list and click OK. button in the lower left of the screen. Disconnecting HDMI Audio Device Move to the desktop of the monitor connected to the NC1000.
Connection to Multiple Monitors Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25) You can set the tile mode by connecting multiple monitors. 1 Connect the NC1000's D-sub OUT to the D-sub IN of the first monitor, which has SET ID = 1. 2 Connect other monitors with D-sub cables as shown below (IN/OUT separated). 3 Connect the NC1000's RS-232C OUT to the RS-232C IN of the first monitor, which has SET ID = 1.
NC2000 Specifications Attention ●P roduct specifications may change without prior notice to improve performance. General Specifications Dimensions 99.8 mm (W) x 183.3 mm (H) x 28.4 mm (D) (only Set) Weight 0.215 kg (only Set) CPU Intel ATOM Processor 330 1.
Operational Specifications Resolution Power Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 12 V Operating Condition Operating Conditions 3.
Included in the Box Basic Components The NC2000 consists of the following components. Please check that these components have been included prior to installation. NC2000 Owner's Manual / Cards screw x 2 Attention ●T hese illustrations may differ from your product and are subject to change. Note ●S uperSign software and manual. - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://www.lgecommercial.com/supersign) and download the latest software for your model.
Connections Back Panel Number A B D C Connection C Description A HDMI Out For an HDMI-compatible monitor. B LAN Connector For a LAN cable. C USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. D PCI MINI EXPRESS Card Slot Provided for PCI Mini Express Cards.
Installation We recommend you to use the items provided with your NC2000 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention ● The illustrations shown are to guide your integration and may differ from your product. 1 Remove the screw and Metal cover. 2 Attach the Box Guide to the rail slots, and press it upward. Note ● I f card does not become fully inserted into the insertion direction.
NC1100/NA1000/NA1100 Specifications Attention ●P roduct specifications may change without prior notice to improve performance. General Specifications Dimensions Weight CPU Chip Set Main Memory Secondary Storage Device 250 mm (W) x 220 mm (H) x 45 mm (D) (only Set) SSD 1.590 kg (only Set) HDD 1860 g (only Set) NC1100 Intel Celeron Processor P4500 (2M Cache, 1.86 GHz) NA1000 Intel Core™ i7-620M Processor (4M Cache, 2.66 GHz) NA1100 Intel Core™ i5-520M Processor (3M Cache, 2.
Operational Specifications Resolution Power Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 100-240 V~ 50/60 Hz 1.
Included in the Box Basic Components The NC1100/NA1000/NA1100 with the following components. Please check that these components have been included prior to installation. NC1100/NA1000/NA1100 Owner's Manual/ Cards Box Guide Power Cable RS-232C Cable Rail x 2 Handle x 2 (for attachment of handle) M3, L8 x 8 M3, L12 x 4 (for attachment of Box Guide on the monitor) Attention ● These illustrations may differ from your product and are subject to change. Note ●S uperSign software and manual.
Connections Back Panel A B C D E F G P/W MIC IN DP H Number 26 I J E L K Connection Description A Power Cable In For the power cable. B RS-232C Out For the RS-232C cable. C Power Button Turns the power on for NC1100/NA1000/NA1100's. D LINE-OUT Connector For a LINE-OUT cable for analog audio transfer. E USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. F HDMI Out For an HDMI-compatible monitor. G LAN Connector For a LAN cable.
Installation We recommend you to use the items provided with your NC1100/NA1000/NA1100 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention ● The illustrations shown are to guide your integration and may differ from your product. 1 Place the handle into the slots on the side of the product. 2 Use screws to secure the handle. 3 Place the rail in the slots on the side of the product.
4 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor. 5 Attach the Box Guide to the rail slots, and press it upward. 6 Use screws to secure the player and the Box Guide as shown below.
In/Out Cable Connection To view images on the monitor, you need to connect NC1100/NA1000/NA1100 to the monitor via a D-SUB, HDMI or DP cable. Attention ● D-SUB, HDMI, DP, LINE-OUT, MIC-IN and LAN cables are not included in the basic components. If the cables were not provided with your monitor, you may need to purchase them separately. ● After cabling is complete, assign the SET ID of the monitor to be connected to NA1000/NC1100/NA1100.
P/W P/W MIC IN DP MIC IN DP 2 Connect the D-sub port of NC1100/NA1000/NA1100 and RGB-IN port of the monitor with a D-sub cable. P/W MIC IN DP P/W MIC IN DP P/W P/W MIC IN DP MIC IN DP 3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable.
P/W MIC IN DP MIC IN DP P/W MIC IN DP 4 Connect the NC1100/NA1000/NA1100 to the monitor with a LINE-OUT cable. P/W MIC IN DP P/W P/W MIC IN DP MIC IN DP P/W MIC IN DP 5 Connect a LAN cable to the NC1100/NA1000/NA1100.
P/W MIC IN DP Connecting a Monitor with an HDMI Cable HDMI connections allow digital video and audio signals to be transferred with one cable. HDMI cable connections do not require an additional audio in cable. Attention ● The monitor to connect with NC1100/NA1000/NA1100 should have the HDMI in for the HDMI connection. ● To use the HDMI device, you need to activate the HDMI device in Microsoft Windows Embedded Standard, the operating system of the NC1100/NA1000/NA1100.
P/W MIC IN DP P/W MIC IN DP 3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable. P/W MIC IN DP P/W MIC IN DP P/W MIC IN DP P/W MIC IN DP 4 Connect a LAN cable to NC1100/NA1000/NA1100.
Connecting/Disconnecting HDMI Audio Device in Windows Connecting HDMI Audio Device Move to the desktop of the monitor connected to the NC1100/NA1000/NA1100. 1 Click the 2 Select Start > Control Panel > Sounds and Audio Devices > Audio. 3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK. button in the lower left of the screen. Disconnecting HDMI Audio Device Move to the desktop of the monitor connected to the NC1100/NA1000/NA1100.
P/W MIC IN Connecting a Monitor with DP Cable DP Attention ● To enable DP connection, the monitor that will be connected to NC1100/NA1000/NA1100 must support the DP input port. ● When connecting the DP (DisplayPort) cable, use the standard cable. Using a non-standard cable may cause a malfunction. 1 Connect the appropriate power cables to a monitor and NC1100/NA1000/NA1100 respectively.
MIC IN DP P/W MIC IN DP 3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable. P/W P/W MIC IN DP P/W MIC IN DP MIC IN DP P/W MIC IN DP 4 Connect the NC1100/NA1000/NA1100 to the monitor with a LINE-OUT cable.
P/W MIC IN DP P/W MIC IN DP 5 Connect a LAN cable to NC1100/NA1000/NA1100. P/W DP MIC IN P/W DP MIC IN Attention ● NC1100/NA1000/NA1100 prioritizes video output in the following order: RGB → DP → HDMI. If you connect multiple cables simultaneously and turn the product on, video output is prioritized accordingly. ● When the product is turned on after cable connection or the operating system is completely booted, DP and HDMI video output start operating.
Connection to Multiple Monitors Each NC1100/NA1000/NA1100 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25) 1 Connect the NC1100/NA1000/NA1100's D-sub OUT to the D-sub IN of the first monitor, which has SET ID = 1. 2 Connect other monitors with D-sub cables as shown below (IN/OUT separated). NC1100/ NA1000/ NA1100 3 Connect the NC1100/NA1000/NA1100's RS-232C OUT to the RS-232C IN of the first monitor, which has SET ID = 1.
NC2100/NA2000/NA2100 Specifications Attention ●P roduct specifications may change without prior notice to improve performance. General Specifications Dimensions 99 mm (W) x 179 mm (H) x 28.5 mm (D) (only Set) Weight CPU(NC2100) CPU(NA2000) CPU(NA2100) Chip Set 0.288 kg (only Set) Intel® Celeron® Processor P4500 (2M Cache, 1.86 GHz) Intel® Core™ i7-620M Processor (4M Cache, 2.66 GHz) Intel® Core™ i5-520M Processor (3M Cache, 2.
Operational Specifications Resolution Power Maximum Resolution 1920 x 1080 @ 60 Hz Recommended Resolution 1920 x 1080 @ 60 Hz Power Rating 12 V Operating Condition Operating Conditions 4.
Included in the Box Basic Components The NC2100/NA2000/NA2100 consists of the following components. Please check that these components have been included prior to installation. NC2100/NA2000/NA2100 Owner's Manual/ Cards screw x 2 Attention ● These illustrations may differ from your product and are subject to change. Note ●S uperSign software and manual. - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://www.lgecommercial.
Connections Back Panel A B C D Number 42 Connection Description A USB In For USB-type devices, including memory, hard disk, CD-ROM, keyboard, and mouse. B HDMI Out For an HDMI-compatible monitor. C LAN Connector For a LAN cable. D PCI MINI EXPRESS Card Slot Provided for PCI Mini Express Cards.
Installation We recommend you to use the items provided with your NC2100/NA2000/NA2100 and follow our instructions for integrating the product with your monitor in order to ensure the correct results. Attention ● The illustrations shown are to guide your integration and may differ from your product. 1 Remove the screw and Metal cover. 2 Attach the Box Guide to the rail slots, and press it upward. Note ● I f card does not become fully inserted into the insertion direction.
Appendix Limitations of Microsoft Windows Embedded Standard The following are potential errors that may occur due to internal limitations of Microsoft Windows Embedded Standard, which is the OS of SuperSign Player. ● If you press Alt + Enter on the DOS window, text other than English may be shown corrupted. ● If you use Save As function in the Print window, the menu window name will be displayed in English.
Make sure to read the Important Precautions before using the product. Ke e p t h e O w n e r ' s M a n u a l (C D ) i n a n accessible place for furture reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL WARNING - This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
