Owner’s Manual

17
1
Click the button in the lower left of the screen.
2 Select Start > Control Panel > Sounds and Audio Devices > Audio.
3 Select Play Sounds > NVIDIA High Denition Audio from the list and click OK.
1
Click the button in the lower left of the screen.
2 Select Start > Control Panel > Sounds and Audio Devices > Audio.
3 Select Play Sounds > Realtek HD Audio output from the list and click OK.
3 Connect the NC1000's RS-232C OUT to the RS-232C INSET ID = 1.
4 Connect other monitors with RS-232C cables as shown below (IN/OUT separated).
1 Connect the NC1000's D-sub OUT to the D-sub INSET ID = 1.
2 Connect other monitors with D-sub cables as shown below (IN/OUT separated).
Connection to Multiple Monitors
Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25)
You can set the tile mode by connecting multiple monitors.
Attention

