Owner’s Manual

Table Of Contents

Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.

Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Realtek HD Audio output from the list and click OK.

Select Start > Control Panel > Hardware and Sound > Sound.

Click the PlayHDMI device or speakers you want and select Set

as Default Device then click OK to connect the HDMI audio device or select Disable to discon-

nect it.

※ In order to change the audio devices, you must restart the computer.

Connecting a Monitor with DP Cable

Attention



DP input port.

              

cause a malfunction.

Connect the appropriate power cables to a monitor and NC1100/NA1000/NA1100 respectively.

2 Connect NC1100/NA1000/NA1100 to the monitor via a DP cable.

MIC IN