OWNER’S MANUAL Sound Bar System Please read this manual carefully before operating your set and retain it for future reference. NB2020A NB2020A-N0_DPHLLLK_ENG_7604.
1 Getting Started 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 This device is equipped with a portable battery or accumulator. Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 7 8 8 9 9 Safety Information Accessories Introduction – Symbols Used in this Manual Remote control Front panel Rear panel Installing the sound bar Installing the cover foot 2 Connecting 10 11 11 Mounting the main unit on a wall Optional Equipment Connection – OPTICAL In connection NB2020A-N0_DPHLLLK_ENG_7604.
Table of Contents 4 Troubleshooting 14 Troubleshooting 5 Appendix 15 15 16 17 Maintenance – Handling the Unit Trademarks and Licenses Specifications 5 1 2 3 4 5 NB2020A-N0_DPHLLLK_ENG_7604.
Getting Started Accessories Introduction Please check and identify the supplied accessories. Symbols Used in this Manual 1 Getting Started ,,Note Indicates special notes and operating features. >>Caution Remote control (1) Batteries (1) Wall Mount Bracket Installation Template (1) Wall bracket (2) Optical cable (1) Cover foot (2) NB2020A-N0_DPHLLLK_ENG_7604.indd 6 Indicates cautions for preventing possible damages from abuse.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power): Switches the unit ON or OFF. DOLBY DRC (ON/ OFF) : Sets the Dobly DRC. • • • • • • • • • • b • • • • • • • • • • VOL -/+ : Adjusts speaker volume. AV SYNC -/+ : Synchronizes the audio and video. ,,Note 1 Getting Started : Mutes the sound.
Getting Started Front panel 1 Getting Started A 1 (Standby/On) B – / + (Volume) Adjusts speaker volume. Rear panel A S/W Download Connector - Only for service. NB2020A-N0_DPHLLLK_ENG_7604.
Getting Started Installing the sound bar Installing the cover foot You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can extend the height of the unit. 9 1 Getting Started Place the unit in front of the TV and connect it to the device you want. (Refer to page11) 1. Turn the unit upside down. 2. After detaching a release layer on the cover foot, Put it on the foot of the unit. 3.
Connecting Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill. Wall Mount Brac ket Installation Template Unit 2 Connecting Wall Mount Bracket Installation Template Wall bracket ,,Note 1.
Connecting 3. Remove the Wall Mount Bracket Installation Template. 11 ,,Note Detach the unit from the bracket as shown below. 4. Fix it with screws (not supplied) as shown in the illustration below. 2 Connecting Optional Equipment Connection OPTICAL In connection Connect an optical output of external devices to the OPTICAL IN connector. 5. Hang the main unit onto the bracket as shown below.
Operating Operations DOLBY DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to the DOLBY DRC by pressing DOLBY DRC ON. To cancel the DOLBY DRC, press DOLBY DRC OFF. AV Sync 3 When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. Operating Use AV SYNC -/+ to scroll up and down through the delay amount, which you can set at anything between 0 and 300ms.
Operating 13 Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. (LG TV only.) 3 Operation MUTE Turn the TV’s volume on or off INPUT Switch the TV’s input source between the TV and other input sources. 1 (TV POWER) Turn the TV on or off. VOL +/– Adjust the volume of the TV. PR/CH w/s Scan up or down through memorized channels.
Troubleshooting Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power No sound Check the condition by operating other electronic devices. Check the OPTICAL IN connection. The remote control is too far from the unit. The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. Remove the obstacle. The battery in the remote control is exhausted. Replace the batteries with new one.
Appendix 15 Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Appendix 17 Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) (900 x 59 x 85) mm Net Weight (Approx.) 2.6 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 1 Amplifier Stereo mode 20 W + 20 W (6 Ω at 1 kHz) Designs and specifications are subject to change without prior notice. 5 Appendix NB2020A-N0_DPHLLLK_ENG_7604.
NB2020A-N0_DPHLLLK_ENG_7604.
