ENGLISH OWNER’S MANUAL 4.1 ch Hi-Fi Sound Bar Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. NB5540 (NB5540, S54A1-D) NB4540 (NB4540, S44A1-D) www.lg.com NB5540-NE_DGBRLLK_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.
Getting Started Europe Notice 1 Getting Started LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC, 2009/125/EC and 2011/65/EU. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product: LG Electronics Inc.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 7 8 8 9 10 Safety Information Unique features Introduction – Symbols used in this manual Accessories Remote control Front panel Rear panel Installing the sound bar Mounting the main unit on a wall 2 Connecting 12 12 13 13 14 14 Connecting the AC adapter Wireless subwoofer connection Connecting to your TV – Using an OPTICAL cable – Using an HDMI cable – Enjoy rich sound broadcast of the channel with the sound bar – What is SIMPLINK? – AR
Getting Started Unique features 1 Auto power down Getting Started This unit will turn off by itself for energy saving consumption. Accessories Please check and identify the supplied accessories. Designs and specifications of the accessories are subject to change without prior notice. Portable In Listen to music from your portable device.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. FUNCTION : Selects the function and the input source. OPTICAL : Changes input source to OPTICAL directly. MUTE i : Mutes the sound. VOL o/p : Adjusts speaker volume. • • • • • • • • • • b • • • • • • • • • • 1 Getting Started FOLDER W/S : Searches a folder on USB device. AUTO POWER : Turns on or off AUTO POWER function. (Refer to the page 20.
Getting Started Front panel 1 Getting Started A Display window B Remote sensor Standby LED It lights up in red on standby mode. C F (Function) Selects the function and input source. D p/o (Volume) Adjusts volume level. E 1/! (Standby/On) Rear panel A DC. IN 25 V 0 2 A D OPT. IN : Optical input B HDMI IN / OUT : HDMI input / output E PORT. IN : Portable input C USB port NB5540-NE_DGBRLLK_ENG.
Getting Started 9 Installing the sound bar 1 Getting Started You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. Place the unit in front of the TV and connect it to the device you want. (Refer to pp. 13 - 18.) >>Caution For best performance of wireless connection such as Bluetooth or wireless subwoofer, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit.
Getting Started Mounting the main unit on a wall 1 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. TV You can mount the main unit on a wall. Getting Started Preparation materials Unit Wall bracket install guide Wall bracket Screws 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Getting Started 4. Fix the brackets with screws (A) as shown in the illustration below. 11 6. Fix the unit with the screws firmly. 1 ,,Note Screws (A) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. Getting Started ,,Note To detach the unit, perform it in reverse order. >>Caution yy Do not install this unit upside down.
Connecting Connecting the AC adapter Wireless subwoofer connection 1. Connect the supplied AC power cord to the AC adapter. LED indicator of wireless subwoofer 2. Connect the AC adapter cable to DC. IN adapter input. 2 3. Plug the AC power cord into an AC outlet. Connecting >>Caution Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
Connecting 13 3. If the LED of the wireless subwoofer already blinks in yellow-green continually, you can skip this step. Connecting to your TV Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. -- The LED of the wireless subwoofer lights up alternately in red and yellow-green. 4. Disconnect the power cord of the main unit and the wireless subwoofer.
Connecting Using an HDMI cable If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. 2 Connecting HDMI cable ,,Note yy HDMI CEC (Consumer Electronics Control): Using a single remote control, you have the ability to operate CEC compatible devices (TV, Sound Bar, Blue-ray player, etc.
Connecting ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. To use this function : -- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet). -- You must connect the HDMI OUT on the unit with HDMI IN of the TV that supports ARC function using an HDMI cable.
Connecting Optional equipment connection For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. HDMI connection 2 For enjoying sound only Connecting You can enjoy the sound from the external device you connect. To the Blu-ray disc player, DVD player, etc. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc. 2. Set the INPUT source to HDMI IN.
Connecting PORT. (Portable) IN connection Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect the portable player to the PORT. (Portable) IN connector of the unit. 2. Turn the power on by pressing 1 (Power). 3. Select the PORTABLE function by pressing FUNCTION on the remote control or F on the unit until the function is selected. 4. Turn on the portable player or external device and start playing it.
Connecting Connect a USB to the USB gender changer when the unit is mounted on the wall. USB device requirement yy Devices which require additional program installation connected to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minutes to be searched. yy To prevent data loss, back up all data. 2 Connecting yy This unit is not supported when the total number of files is 1000 or more.
Operating Basic operations USB operation 1. Connect the USB device to the USB port. 2. Select the USB function by pressing FUNCTION on the remote control or F on the unit until the function is selected. To Stop Playback Pause Do this Press Z. Press d/M. During playback, press d/M. Search for a section within a file Press and hold C/V during playback and release it at the point you want to listen to.
Operating AUTO POWER On/Off Auto power down This function automatically turns on/off the unit when you turn on/off the TV or the external device (DVD Player, Blu-ray Disc Player, etc.) connected to this unit. This unit will be off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes. It is supported only on OPTICAL and LG TV functions.
Operating LG Sound Sync 21 With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute Optical cable Refer to the TV's instruction manual for the details of LG Sound Sync.
Operating 1. Turn on the unit by pressing 1 (Power) on the remote control. Using Bluetooth technology 2. Select LG TV function by using FUNCTION on the remote control or F on the unit until the function is selected. About Bluetooth 3. Set up LG Sound Sync (Wireless) on the TV. Refer to the TV's instruction manual. Bluetooth is wireless communication technology for short range connection.
Operating 23 Listening to music stored on the Bluetooth devices Pairing your unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 2. Operate the Bluetooth device and perform the pairing operation.
Operating Sound adjustment Adjust volume level automatically Setting sound effect This unit supports Auto volume function that automatically adjusts the volume level. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. When the output sound is too loud or too low, press AUTO VOLUME on the remote control. So you can enjoy the sound with appropriate levels.
Operating 25 Controlling a TV with the supplied remote control You can control your TV using the buttons below. AV/INPUT VOL + PR/CH VOL - PR/CH Operation MUTEi Turn the TV’s volume on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. 1 (TV Power) Turn the TV on or off. VOL o/p Adjust the volume of the TV. PR/CH W/S Scan up or down through memorized channels. You can operate your TV with the supplied remote control.
Troubleshooting Troubleshooting PROBLEM No Power No sound No woofer sound No display 4 CAUSE & CORRECTION yy The power cord is unpluged. Plug in the power cord. yy Check the condition by operating other electronic devices. yy Incorrect input source is selected. Check the input source and select the correct input source. yy The mute function is activated. Press MUTEi or adjust the volume level to cancel the mute function. yy The power cord of the subwoofer is not connected.
Appendix 27 Specifications NB5540 General (NB5540) AC adapter requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Dimensions (W x H x D) (1020 x 35 x 82) mm Net Weight (Approx.) 1.86 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Input/Output OPT. IN 3 V (p-p), Optical jack x 1 PORT. IN 0.5 Vrms (3.
Appendix NB4540 General (NB4540) AC adapter requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Dimensions (W x H x D) (840 x 35 x 82) mm Net Weight (Approx.) 1.55 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Input/Output OPT. IN 3 V (p-p), Optical jack x 1 PORT. IN 0.5 Vrms (3.
Appendix 29 Trademarks and licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Bluetooth® wireless technology is a system which allows radio contact between electronic.
Appendix Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Warranty Warranty 31 Technology with the human touch GUARANTEE • LG Electronics U.K. Ltd. will provide the following services in order toexpedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2.
NB5540-NE_DGBRLLK_ENG.
