Owner's Manual

Using Multi-Room
10
Multi-Room Network Setup
Step 1. Home Network Requirement
a
b
c
d
a
Make sure that wireless network environment using a
router is installed at your home. The home router should be
connected to the internet.
b
Connect your smart device to your home network.
c
Connect the speaker to the power supply.
d
If you want to enjoy the music on media server (PC, Mac or
Network Storage), connect the media server to your home
network.
.
Caution for Home Network Requirement
y
MUSICow system communicates over both 2.4 GHz and
5 GHz home network supporting 802.11b/g/n wireless
technology.
y
Wireless signal interference may lead to disconnection of
network or stopping playback.
y
Depending on the speed of your network, playback of online
contents may not work well.
y
Network connection may not be made with some routers
(or modem) from certain internet communication service
providers. In such case, purchase a router from general market
and use.
y
Because of a rewall on your PC, Music Flow PC Software may
not work well. In this case, disable all your rewalls and try to
connect again. Refer to your rewall’s instruction or website.
2 Using Multi-Room
NP8350-M0.BSGPLLK_SIM_ENG_MFL68922605.indd 10 2015-03-20  5:26:33