Owner's Manual
Using Multi-Room
17
,
Note for Multi-Room Setup
y
You can make all wireless/wired connection according to the
location of the router. But we recommend that you connect
the bridge to the router using LAN cable and connect
additional speakers for network stability.
y
When the “Firmware update” pop-up appears on Music Flow
Player App, touch to start updating.
y
If you connected a speaker with a LAN cable and installed
other speakers additionally: If the speaker with frequent
sound breaking is not close enough with the cable connected
speaker, additionally install Bridge or other speaker in the
middle location between the speaker connected with LAN
cable and the speaker with sound breaking, and try again.
y
Even if you connected speakers with MUSICow mesh
network, music sound breaks by ambient signal interference
causing Wi-Fi network defect. In this case, you can try to
change Mesh network channel of MUSICow system at the
[Settings
à
Advanced settings
à
Mesh Network Channel].
y
When making connection, “Mesh network composition” may
appear and it takes about 30 seconds. This message appears
once in rst installation but appear again when you change
network environment.
y
If you set the multiple speakers through standard wireless
connection mode, we recommend that choose any speaker
or bridge which can be installed nearby the home router in
wired cable and start [Settings
à
Advanced settings
à
Mesh
network composition].
NP8350-M0.BSGPLLK_SIM_ENG_MFL68922605.indd 17 2015-03-20 5:26:34