OLED TV OLED55B7* OLED65B7* AA X4 (M4 X L12) : Depending on model / Selon le modèle / Dependendo do modelo / www.lg.
1 2 3 4 5 6
ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN LAN AUDIO OUT/ H/P OUT
LAN AUDIO OUT/ H/P OUT Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT
AV IN VIDEO L/MONO AUDIO R COMPONENT IN AUDIO VIDEO
1 2 3 4
0 1 A 2 E D B F A OLED55B7T-T OLED55B7V-T OLED55B7Y-T OLED65B7T-T OLED65B7V-T OLED65B7Y-T G C B C D E F F G 1229 759 225 708 48.6 20.5 17.2 1451 882 225 831 48.6 26.4 23.
*MFL69649031*
Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL69708703* P/NO : MFL69708703 (1705-REV01) Printed in Korea Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
•• Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product. •• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
ENGLISH •• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. •• Prevent dust collecting on the power plug pins or outlet. This may cause a fire hazard. •• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.
•• When holding the TV, the screen should face away from you to avoid damage. ENGLISH •• Do not use any unapproved items to ensure the safety and product life span. •• Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty. •• Some models have a thin film attached on to the screen and this must not be removed. •• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
Using the button (Depending on model) ENGLISH You can simply operate the TV functions, using the button. Adjusting the menu When the TV is turned on, press the the Menu items using the button. button one time. You can adjust Turns the power off. Clears on-screen displays and returns to TV viewing. Changes the input source. Accesses the settings menu. Mounting on a table 1 Lift and tilt the TV into its upright position on a table.
Securing the TV to a wall (This feature is not available for all models.) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall.
Connections (notifications) ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. •• The external device connection may differ from the model.
Magic remote functions •• Some buttons and services may not be provided depending on models or regions. (Voice recognition) Network connection is required to use the voice recognition function. 1 Press the voice recognition button. 2 Speak when the voice display window appears on the TV screen. (SEARCH)* Search for content such as TV programmes, movies and other videos, or perform a web search by entering text in the search bar.
ENGLISH Returns to the previous level. * Clears on-screen displays and returns to last input viewing. Shows programmes guide. 3 4 Streaming Service buttons Connects to the Video Streaming Service. (INPUT) Changes the input source. -- Pressing and holding the button displays all the lists of external inputs. (Q. Settings) Accesses the Quick Settings. 2 4 -- Pressing and holding the button displays the All Settings menu. Teletext buttons ( , ) These buttons are used for teletext.
(HOME) Accesses the Home menu. */ Shows the previous history. Displays the set-top box Home menu. 2 -- When you are not watching via a set-top box: the display changes to the set-top box screen. Wheel (OK) Press the center of the Wheel button to select a menu. You can change programmes by using the Wheel button. Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu.
External control device setup ENGLISH To obtain the external control device setup information, please visit www.lg.com. Troubleshooting Cannot control the TV with the remote control. •• Check the remote control sensor on the product and try again. •• Check if there is any obstacle between the product and the remote control. •• Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. •• Check if the product is turned on.
Specifications Analogue TV (Depending on country) Television system DVB-T/T21 DVB-T/T2/C/S/S22 PAL B/B, PAL B/G, PAL D/K, PAL-I SECAM B/G, SECAM D/K NTSC-M Programme coverage VHF, UHF, C-Band2, Ku-Band2 VHF, UHF, CATV Wireless module specifications •• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Regulatory ENGLISH WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: •• Using cabinets or stands recommended by the manufacturer of the television set. •• Only using furniture that can safely support the television set. •• Ensuring the television set is not overhanging the edge of the supporting furniture.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 545454 in South Africa 080 100 54 54 in Morocco 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
