Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED55B6P OLED65B6P OLED55C6P OLED65C6P *MFL69383602* OLED55E6P OLED65E6P www.lg.
Important Safety Instructions Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. f Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
f Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. f Unplug this apparatus during lightning storms or when unused for long periods of time. f Refer all servicing to qualified service personnel.
f Grounding - (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
Viewing 3D Imaging (For 3D models) CAUTION f Guardians should not leave children unsupervised who are watching a 3D video. Guardians should make children stop watching the video and take a rest if they experience eye fatigue, headache, or dizziness. f When viewing a 3D video, some may experience discomfort such as a headache, dizziness, fatigue, or blurred vision. In this case, stop watching the 3D video and take a rest. f If you watch a 3D video for a long time, you may experience eye fatigue.
Preparing CAUTION NOTE ENGLISH f When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. f Image shown may differ from your TV. f Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. f The available menus and options may differ from the input source or product model that you are using. f New features may be added to this TV in the future.
Lifting and Moving the TV Using the Button When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. f It is recommended to move the TV in the box or packing material that the TV originally came in. f Before moving or lifting the TV, disconnect the power cord and all cables. (Depending upon model) You can simply operate the TV functions, pressing or moving the button.
Mounting on a Table NOTE 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) m 10 c 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION f Do not place the TV near or on sources of heat, as this may result in fire or other damage.
NOTE f Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. CAUTION f To install the wall mount, use the stand assembly screws to attach the wall mount cover to the bottom of the product as shown in the following illustration. (For OLED55/65E6P) Provided Item f Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. f Some USB Hubs may not work.
Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided. A NOTE f ENGLISH > > > General > HDMI ULTRA HD Deep Color: - On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) - Off : Support 4K @ 60 Hz 8bit (4:2:0) f If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer.
Battery Installation A WARNING DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. CAUTION Magic Remote Functions (Depending upon model) When the message Magic remote battery is low. Change the battery. is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover.
B Adjusts the volume level. (MUTE) Mutes all sounds. * Video descriptions function will be enabled. f SAP (Secondary Audio Program) Feature can also be enabled by pressing the key. Scrolls through the saved channels. (Home) Accesses the Home menu. * Shows the previous history. (Search) Search for content such as channels, movies and other videos, or perform a web search by entering your search terms in the search box.
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Wireless Module (LGSBWAC61) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 15 dBm 5150 to 5725 MHz 16 dBm 5725 to 5850 MHz 12.5 dBm Bluetooth Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 10 dBm f As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Regulatory FCC Notice FCC Radio Frequency Interference Requirements (for UNII devices) [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body.
WARNING ENGLISH (For Canada) [For product having the wireless function using 5 GHz frequency bands] 1 The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2 For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES BVcj[VXijgZgh! gZiV^aZgh VcY i]Z gZhi d[ i]Z XdchjbZg ZaZXigdc^Xh ^cYjhign VgZ Xdbb^iiZY id bV`^c\ ]dbZ ZciZgiV^cbZci hV[Z VcY Zc_dnVWaZ# 6h ndj Zc_dn ndjg iZaZk^h^dc! eaZVhZ cdiZ i]Vi Vaa iZaZk^h^dch ¸ cZl VcY daY" bjhi WZ hjeedgiZY dc egdeZg hiVcYh dg ^chiVaaZY VXXdgY^c\ id i]Z bVcj[VXijgZg½h gZXdbbZcYVi^dch# IZaZk^h^dch i]Vi VgZ ^cVeegdeg^ViZan h^ijViZY dc YgZhhZgh! Wdd`XVhZh! h]ZakZh! YZh`h! he
Declaration of Conformity Trade Name LG Model OLED55B6P-U, OLED65B6P-U OLED55C6P-U, OLED65C6P-U OLED55E6P-U, OLED65E6P-U Responsible Party LG Electronics Inc. Address 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL 201 - 266 - 2534 LG Customer Information Center For inquires or comments, visit www.lg.com or call; The model and serial numbers of the TV are located on the back and one side of the TV. Record them below should you ever need service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
4 EXTERNAL CONTROL DEVICE SETUP • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] Ź To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] Ź To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] 04.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) Ź To adjust the screen tint. You can also adjust tint in the PICTURE menu. 14. Bass (Command: k s) Ź To adjust Bass. You can also adjust in the AUDIO menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 WK %DQG 0 0 1 0 1 GHFLPDO Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) Ź To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP Ź To select input source for main picture.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) Ź To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
webOS TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending upon the Operating System (OS). * Depending upon the version of the software, icon position can be changed. 1 (Home) button to access the Press the Picture Smarthome menu. Select Wheel (OK). (Settings) and press Sound Channels Network General Safety WI-FI NETWORK Network / iptime_xu.ji iptime_shinsung.kang iptime_ungkee.choi iptime_sungho.jo iptime_seungjun.
Troubleshooting Network Problems Depending upon the version of the software, icon position can be changed. 1 ENGLISH 2 Press the (Home) button to access the Smarthome menu. Select (Settings) and press Wheel (OK). (All Settings) and press Select Wheel (OK). Check the AP (Router) or consult your Internet service provider. When X appears next to Gateway: 1 Unplug the power cord of the AP (Router) or cable modem, wait 10 seconds. Reapply power. 2 Initialize (Reset) the AP (Router) or cable modem.
SmartShare PC SW Installation & Setting Install the SmartShare PC SW program on your PC. Go to www.lg.com . Then, select your region. 2 Select SUPPORT. 3 Select Software & Firmware. Then, search for your model. Then, select SmartShare PC SW. 4 Download the SmartShare PC SW and install it on your PC. You can run the program when installation is complete. NOTE y SmartShare service is only available if TV and other devices are connected to the same AP (Router).
Wi-Fi Direct Setting (Home) (Settings) (All Settings) Network Wi-Fi DIRECT If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. ENGLISH WI-FI DIRECT Picture Network / REFRESH LIST Sound 1 When you open Wi-Fi Direct menu, a list of available devices appears. Select your device.
Troubleshooting Wi-Fi Network Problems Checkpoints Wi-Fi Router y Interference Factors If there is any interference from surrounding equipment, the network connection may be weak or unstable. - Wireless telephones that operate in the 2.4 GHz or 5 GHz bandwidth - Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth - Video transmitters that operate in the 2.4 GHz or 5 GHz bandwidth - Other wireless devices (Microwaves, cameras, baby monitors, neighboring wireless devices, etc.
y Radio Frequency (RF) Interference and Absorbing Obstructions Type of Barrier ENGLISH Wood Synthetic material Glass Metal Interference Potential Low Low Low Very High Type of Barrier Water Bricks Marble Interference Potential Medium Medium Medium Type of Barrier Interference Potential Plaster Concrete Bulletproof glass High High High
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. OLED TV OLED55B6P OLED65B6P ESPAÑOL Qye \tmhe hi MsrŃ kyvegm¬r Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Qymhi hi gsrŃ kyvexmsr vetmhi Avant d’utiliser l’appareil, veuillez lire attentivement ce guide et conservez-le pour pouvoir vous y reporter ultérieurement. AA X4 (M4 x L12) www.lg.
ENGLISH Read ]ejix} erh \ijivirgi. ESPAÑOL Leer ]ikyvmheh } Msrwypxew. FRANÇAIS Lisez ]gyvmx ix vjvirgiw.
1 2 4 5 3
1 2 3 4
ENGLISH 0 1 2 MODELS Dimensions W x H x T (D) Weight Current value / Power consumption With stand Without stand With stand Without stand For USA and Canada For Mexico Power requirement OLED55B6P OLED65B6P (OLED55B6P-U) (OLED65B6P-U) 1,229 x 759 x 225 (mm) 1,451 x 882 x 225 (mm) 48.3 x 29.8 x 8.8 (inches) 57.1 x 34.7 x 8.8 (inches) 1,229 x 715 x 48.6 (mm) 1,451 x 838 x 48.6 (mm) 48.3 x 28.1 x 1.9 (inches) 57.1 x 32.9 x 1.9 (inches) 19.5 kg (42.9 lbs) 25.9 kg (57.1 lbs) 16.2 kg (35.7 lbs) 22.6 kg (49.
*MFL69383622*
.LG Life's Good LG Electronics, Inc. LCD I LED I OLEO Television Limited Warranty - USA Your LG Electronics ("LG") LCD I LED I OLEO Television ("unit") will be repaired or replaced, at LG's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the unit.
LCD 1 LED 1 OLEO Television Limited Warranty- USA (continued) CUSTOMER INTERACTIVE CENTER NUMBERS To obtain Customer Assistance, Product Information, or Dealer or Authorized Service Center location: CONSUMER USER Please call 1-800-243-0000 and select the appropriate option from the menu. Or visit our website at: http://www.lg.com COMMERCIAL USER Please call (888) 865-3026 and select the appropriate option from the menu. Or visit our website at: http://www.lg.
