Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED55B6P OLED65B6P OLED55C6P OLED65C6P *MFL69383602* OLED55E6P OLED65E6P www.lg.
Important Safety Instructions Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. ••Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
••Only use attachments/accessories specified by the manufacturer. ••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ••Unplug this apparatus during lightning storms or when unused for long periods of time. ••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.
••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
Viewing 3D Imaging (For 3D models) CAUTION ••Guardians should not leave children unsupervised who are watching a 3D video. Guardians should make children stop watching the video and take a rest if they experience eye fatigue, headache, or dizziness. ••When viewing a 3D video, some may experience discomfort such as a headache, dizziness, fatigue, or blurred vision. In this case, stop watching the 3D video and take a rest. ••If you watch a 3D video for a long time, you may experience eye fatigue.
Preparing CAUTION NOTE ENGLISH ••When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. ••Image shown may differ from your TV. ••Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. ••The available menus and options may differ from the input source or product model that you are using. ••New features may be added to this TV in the future.
Lifting and Moving the TV Using the Button When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. ••It is recommended to move the TV in the box or packing material that the TV originally came in. ••Before moving or lifting the TV, disconnect the power cord and all cables. (Depending upon model) You can simply operate the TV functions, pressing or moving the button.
Mounting on a Table NOTE 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) m 10 c 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION ••Do not place the TV near or on sources of heat, as this may result in fire or other damage.
CAUTION ••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. NOTE ••To remove the stand, hold the top and bottom of stand, then pull it out while also lowering it as shown in the following illustration. (For OLED55/65E6P) 2 1 2 1 •• To install the wall mount, use the stand assembly screws to attach the wall mount cover to the bottom of the product as shown in the following illustration.
Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided. A NOTE ENGLISH •• > > > General > HDMI ULTRA HD Deep Color: -- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 60 Hz 8bit (4:2:0) ••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer.
Battery Installation A WARNING DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. CAUTION Magic Remote Functions (Depending upon model) When the message Magic remote battery is low. Change the battery. is displayed, replace the battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover.
B Adjusts the volume level. (MUTE) Mutes all sounds. * Video descriptions function will be enabled. ••SAP (Secondary Audio Program) Feature can also be enabled by pressing the key. Scrolls through the saved channels. (Home) Accesses the Home menu. * Shows the previous history. (Search) Search for content such as channels, movies and other videos, or perform a web search by entering your search terms in the search box.
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Wireless Module (LGSBWAC61) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 15 dBm 5150 to 5725 MHz 16 dBm 5725 to 5850 MHz 12.5 dBm Bluetooth Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 10 dBm ••As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Regulatory FCC Notice FCC Radio Frequency Interference Requirements (for UNII devices) [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body.
WARNING ENGLISH (For Canada) [For product having the wireless function using 5 GHz frequency bands] 1 The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2 For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name LG Model OLED55B6P-U, OLED65B6P-U, OLED55C6P-U, OLED65C6P-U, OLED55E6P-U, OLED65E6P-U Responsible Party LG Electronics Inc. Address 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL 201 - 266 - 2534 LG Customer Information Center For inquires or comments, visit www.lg.com or call; The model and serial numbers of the TV are located on the back and one side of the TV. Record them below should you ever need service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) * For other models, connect to the USB port. (PC) (CONTROL & SERVICE) * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] Ack [r][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) * (Depending on model) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. 14. Bass (Command: k s) Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] ►► To adjust Bass. You can also adjust in the AUDIO menu.
EXTERNAL CONTROL DEVICE SETUP 6 5 0 0 0 0 0 0 1 Frequency 4 3 2 1 0 Step 0 1st Band 0 0 0 0 0 0(decimal) 1 2nd Band 0 0 0 0 1 1(decimal) 1 0 3rd Band ... ... ... ... ... ... 1 1 4th Band 1 0 0 1 1 19(decimal) 0 0 5th Band 1 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Digital Antenna/Cable Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 : Antenna TV (DTV) – Use Physical Channel Number - 06 : Cable TV (CADTV) – Use Physical Channel Number - 22 : Antenna TV (DTV)
EXTERNAL CONTROL DEVICE SETUP ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 25. 3D(Command: x t) (only 3D models) (Depending on model) ►► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] Data Key code - p.2. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Control Backlight (Command: m g) • For LCD TV / LED TV ►► To control the backlight.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 26. Extended 3D(Command: x v) (only 3D models) (Depending on model) 27. Auto Configure (Command: j u) (Depending on model) ►► To change 3D option for TV. ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
EXTERNAL CONTROL DEVICE SETUP 13 (For USA only) How to connect 1. Connect your TV to a wired or wireless network. 2. Press and hold the (Settings) button on the remote control for at least 5 seconds on the Live TV screen. Once the Live TV channel banner appears at the top of the screen, enter 828 and press the OK button to enter the ‘IP Control Setup’ menu. * The 3-digit password (default password: 828) can be changed using Password Change. 3.
14 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Command reference list COMMAND 01. Power 04. Volume Mute POWER off ASPECT_RATIO [4by3 /16by9 / setbyoriginal] SCREEN_MUTE [screenmuteon / videomuteon / allmuteoff] VOLUME_MUTE [on / off] 05. Volume Control VOLUME_CONTROL [0 to 100] 06. Contrast PICTURE_CONTRAST [0 to 100] 07. Brightness PICTURE_BRIGHTNESS [0 to 100] 08. Color/Colour PICTURE_COLOUR [0 to 100] 09. Tint PICTURE_TINT [0 to 100] 10. Sharpness PICTURE_SHARPNESS [0 to 50] 11.
EXTERNAL CONTROL DEVICE SETUP 19. Key 20. Control Backlight 21.
16 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG COMMAND PICTURE_3D_EXTENSION picturecorrection [0 / 1] PICTURE_3D_EXTENSION [colorcorrection / sound] [0 / 1] PICTURE_3D_EXTENSION normal [0 23.
webOS TV Quick Setup Guide * Image shown may differ from your TV. * Image shown on a PC or mobile phone may vary depending upon the Operating System (OS). * Depending upon the version of the software, icon position can be changed. 1 (Home) button to access the Press the Smarthome menu. Select Wheel (OK). (Settings) and press Picture Sound Channels Network General Safety WI-FI NETWORK Network / iptime_xu.ji iptime_shinsung.kang iptime_ungkee.choi iptime_sungho.jo iptime_seungjun.
Troubleshooting Network Problems Depending upon the version of the software, icon position can be changed. 1 ENGLISH 2 Press the (Home) button to access the Smarthome menu. Select (Settings) and press Wheel (OK). (All Settings) and press Select Wheel (OK). Check the AP (Router) or consult your Internet service provider. When X appears next to Gateway: 1 Unplug the power cord of the AP (Router) or cable modem, wait 10 seconds. Reapply power. 2 Initialize (Reset) the AP (Router) or cable modem.
SmartShare PC SW Installation & Setting Install the SmartShare PC SW program on your PC. Go to www.lg.com . Then, select your region. 2 Select SUPPORT. 3 Select Software & Firmware. Then, search for your model. Then, select SmartShare PC SW. 4 Download the SmartShare PC SW and install it on your PC. You can run the program when installation is complete. NOTE yySmartShare service is only available if TV and other devices are connected to the same AP (Router).
Wi-Fi Direct Setting (Home) (Settings) (All Settings) Network Wi-Fi DIRECT If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. ENGLISH WI-FI DIRECT Picture Network / REFRESH LIST Sound 1 When you open Wi-Fi Direct menu, a list of available devices appears. Select your device.
Troubleshooting Wi-Fi Network Problems Checkpoints Wi-Fi Router yyInterference Factors If there is any interference from surrounding equipment, the network connection may be weak or unstable. -- Wireless telephones that operate in the 2.4 GHz or 5 GHz bandwidth -- Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth -- Video transmitters that operate in the 2.4 GHz or 5 GHz bandwidth -- Other wireless devices (Microwaves, cameras, baby monitors, neighboring wireless devices, etc.
yyRadio Frequency (RF) Interference and Absorbing Obstructions Type of Barrier ENGLISH Wood Synthetic material Glass Metal Interference Potential Low Low Low Very High Type of Barrier Water Bricks Marble Interference Potential Medium Medium Medium Type of Barrier Interference Potential Plaster Concrete Bulletproof glass High High High
OLED TV ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. OLED55B6P OLED65B6P ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce guide et conservez-le pour pouvoir vous y reporter ultérieurement. AA X4 (M4 x L12) www.lg.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
1 2 4 5 3
1 2 3 4
ENGLISH 0 1 2 MODELS Dimensions W x H x T (D) Weight Current value / Power consumption With stand Without stand With stand Without stand For USA and Canada For Mexico Power requirement OLED55B6P OLED65B6P (OLED55B6P-U) (OLED65B6P-U) 1,229 x 759 x 225 (mm) 1,451 x 882 x 225 (mm) 48.3 x 29.8 x 8.8 (inches) 57.1 x 34.7 x 8.8 (inches) 1,229 x 715 x 48.6 (mm) 1,451 x 838 x 48.6 (mm) 48.3 x 28.1 x 1.9 (inches) 57.1 x 32.9 x 1.9 (inches) 19.5 kg (42.9 lbs) 25.9 kg (57.1 lbs) 16.2 kg (35.7 lbs) 22.6 kg (49.
*MFL69383622*
