ENGLISH OLED TV Easy Setup Guide OLED55B7P Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL OLED65B7P Guía Rápida de Configuración OLED55B7A Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS OLED65B7A Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. AA X4 (M4 x L12) www.lg.
ENGLISH Read Safety & Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
1 2 3 4 5 6
www.lg.
1 2 3 4
0 1 2 , OLED55B7P-U OLED55B7A-U OLED65B7P-U OLED65B7A-U 1,229 (48.3) 1,451 (57.1) 1 229 759 759 (48,3) (29.8) (29,8) 1 451 882 882 (57,1) (34.7) (34,7) 225 (8.8) 225 (8.8) 225 (8,8) 225 (8,8) 708 708 (27.8) (27,8) 831 831 (32.7) (32,7) 48.6 (1.9) 48.6 (1.9) 48,6 (1,9) 48,6 (1,9) , , , : mm (inches / pulgadas / po) , : kg (lbs / libras / lb) 20.5 20,5 17.2 17,2 (45.1) (45,1) (37.9) (37,9) 26.4 26,4 23.1 23,1 (58.2) (58,2) (50.9) (50,9) 3.7 A / 370 W 3,7 A / 370 W 5.
*MFL69648406*
Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED55B7P OLED55C7P OLED55E7P OLED55B7A OLED65B7P OLED65C7P OLED65E7P OLED65B7A www.lg.com *MFL69707602* P/NO : MFL69707602 (1708-REV03) Printed in Korea Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
Warning! Important Safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. ••Only use attachments/accessories specified by the manufacturer. ••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A.
ENGLISH ••Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation. ••Never disassemble the AC adapter or power cord. This may result in fire or electric shock. ••Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter. ••Keep the product away from direct sunlight. ••Never touch this apparatus or antenna during a lightning storm.
••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.) ••Do not fasten the screws with excessive force otherwise they may be worn out and become loose. ••Make sure to wring any excess water or cleaner from the cloth. ••Do not spray water or cleaner directly onto the TV screen. ••Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.
Using the Joystick Button Mounting on a Table (Depending upon model) You can operate the TV functions, using the button. 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm m 10 c or 2 Connect the power cord to a wall outlet. ••Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.
••Make sure that children do not climb on or hang on the TV. ••Use a platform or cabinet that is strong and large enough to support the TV securely. ••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer. Mounting on a Wall Model VESA (A x B) Standard screw Number of screws Wall mount bracket OTW420B (optional) OLED55E7P 400 x 200 M6 4 OTW420B A B ••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
Connections (Notifications) ENGLISH You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. ••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR.
Magic Remote Functions (Some buttons and services may not be provided depending upon models or regions.) When the message Magic remote battery is low. Change the battery. is displayed, replace the batteries. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover.
C Registering Magic Remote (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Wheel (OK) Press the center of the Wheel button to select a menu. You can change channels by using the Wheel button. Returns to the previous screen.
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
FCC Radio Frequency Interference Requirements (for UNII devices) High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter. FCC RF Radiation Exposure Statement [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ••Using cabinets or stands recommended by the manufacturer of the television set. ••Only using furniture that can safely support the television set. ••Ensuring the television set is not overhanging the edge of the supporting furniture.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name LG Model OLED55B7P-U, OLED55C7P-U, OLED55E7P-U, OLED55B7A-U, OLED65B7P-U, OLED65C7P-U, OLED65E7P-U, OLED65B7A-U Responsible Party LG Electronics Inc. Address 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL 201-266-2534 LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
WebOS TV Quick Setup Guide Network Settings 1 Press the (Home) button to access the Smarthome menu. Select (Settings) and press Wheel (OK). Picture Sound Channels WI-FI CONNECTION Network/ iptime_Jungju.Lee iptime_areum.kim iptime_yujin.choi iptime_bonghee.Kwon iptime_seokhak.le e Network General Add a Hidden Wireless Network Connect via WPS PBC Connect via WPS PIN Advanced Wi-Fi Settings Safety 2 Select (All Settings) and press Wheel (OK).
Troubleshooting Network Problems Depending upon the version of the software, icon position can be changed. ENGLISH 1 Press the (Home) button to access the Smarthome menu. Select (Settings) and press Wheel (OK). 2 Select (All Settings) and press Wheel (OK). 3 Select the Network Wired Connection (Ethernet) or Wi-Fi Connection Advanced WiFi Settings. Picture Sound Channels Network General Follow the instructions below that match to your network status. Check the TV or the AP (Router).
SmartShare PC SW Installation & Setting NOTE ••SmartShare service is only available if TV and other devices are connected to the same AP (Router). SmartShare Connection to Smartphone 1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. 2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). 3 Enable your smartphone to share content files with other devices. 4 Open Device Connector application on TV.
Wi-Fi Direct Setting ENGLISH (Home) (Settings) (All Settings) Network Wi-Fi Direct If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi Direct. With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct. Picture Sound Channels Network General Wi-Fi Direct Network/ LG webOS TV UJ6500 1 When you open Wi-Fi Direct menu, a list of available devices appears. Select your device.
Troubleshooting Wi-Fi Network Problems Checkpoints Wi-Fi Router ENGLISH ••Make sure that you have the latest version of the software. -- If you are using a Wi-Fi router, check whether you have the latest firmware installed. -- If there are any available updates, update the firmware according to the manufacturer's instructions. -- Check the current software version and if there is an available update, install it.
ENGLISH ••Interference Factors If there is any interference from surrounding equipment, the network connection may be weak or unstable. -- Wireless telephones that operate in the 2.4 GHz or 5 GHz bandwidth -- Wireless speakers that operate in the 2.4 GHz or 5 GHz bandwidth -- Video transmitters that operate in the 2.4 GHz or 5 GHz bandwidth -- Other wireless devices (Microwaves, cameras, baby monitors, neighboring wireless devices, etc.) that operate in the 2.4 GHz or 5 GHz bandwidth.
