OLED TV OLED65C6* AA X8 (M4 X L20) www.lg.
1 2 3 4 5 6
ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN LAN AUDIO OUT/ H/P OUT
LAN AUDIO OUT/ H/P OUT AUDIO OUT/ Satellite IN H/P OUT OPTICAL DIGITAL Satellite IN AUDIO OUT PCMCIA CARD SLOT PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT AV IN COMPONENT IN
AV IN VIDEO L/MONO AUDIO R COMPONENT IN AUDIO VIDEO
1 2 3 4
*MFL69387482* 0 1 F A 2 E D B H C G A OLED65C6P-P 1446 B 883 C 237 D 838 E 48.9 F 101.2 G 23.8 G H 18.
Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. *MFL69361142* www.lg.
Safety instructions Please read these safety precautions carefully before using the product.
ENGLISH Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. Do not insert any metal objects/conductors (like a metal chopstick/ cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.
Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. ENGLISH Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. If water enters or comes into contact with TV, AC adapter or power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electric shock or fire.
CAUTION There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Do not install the product on places such as unstable shelves or inclined surfaces.
ENGLISH Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.
When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (Deformation, corrosion or breakage).
Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. ENGLISH Some horizontal lines may appear when the Clear Panel Noise feature is performed. It is normal and there is no need to be concerned. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity.
Lifting and moving the TV CAUTION Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. ENGLISH • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty. • Some models have a thin film attached on to the screen and this must not be removed.
Basic functions CAUTION ENGLISH • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. Power On (Press) Power Off (Press and hold)1 Volume Control Using the button Programmes Control (Depending on model) You can simply operate the TV functions, pressing or moving the button.
WARNING • Using cabinets or stands recommended by the manufacturer of the television. • Only using furniture that can safely support the television. • Ensuring the television is not overhanging the edge of the supporting furniture. • Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. • Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
NOTE NOTE • To remove the stand, hold the top and bottom of stand, then pull it out while also lowering it as shown below. (Only OLED55/65E6*) ENGLISH 2 1 2 1 • To install the wall mount, use the stand assembly screws to attach the Wall mount cover to the bottom of the product as shown in the figure below. (Only when the item of the following form is provided) Provided item • The external device connection may differ from the model.
Slim remote control Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly. (Depending on model) Other connections The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.
Magic remote functions B ENGLISH Returns to the previous level. Clears on-screen displays and returns to TV viewing. (HOME) Accesses the Home menu. (INPUT) Changes the input source. * Pressing and holding the button displays all the lists of external inputs. Navigation buttons (up/down/left/right) Press the up, down, left or right button to scroll the menu. Selects menus or options and confirms your input. (Depending on model) When the message “Magic remote battery is low. Change the battery.
B D C Used for viewing 3D video. (Only 3D models) (INPUT) Changes the input source. * Pressing and holding the button displays all the lists of external inputs. (Q. Settings) Accesses the Quick Settings. * Pressing and holding the button displays the All Settings menu. Control buttons ( ) Controls media contents. ENGLISH Adjusts the volume level. Scrolls through the saved programmes. (MUTE) Mutes all sounds.
Licenses Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Cannot control the TV with the remote control. ENGLISH Open source software notice information To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource. lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Specifications Wireless module specification * FCC ID: BEJLGSBWAC61 / IC: 2703H-LGSBWAC61 Wireless module (LGSBWAC61) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 5150 to 5725 MHz 5725 to 5850 MHz 15 dBm 16 dBm 12.5 dBm Bluetooth Frequency Range Output Power (Max.) 2400 to 2483.
Regulatory ENGLISH WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • • • • Using cabinets or stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG key CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 (PC)EXTERNAL CONTROL DEVICE SETUP (PC) (TV) (TV) Phone jack Type (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV. 1 3 (PC) (PC) 1 3 2 2 - or (TV) (TV) (TV) (TV) 1 3 (PC) (PC) SERVICE ONLY ONLY SERVICE ENGLISH ENG RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p. 7) 03. Screen Mute k d (p. 7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 * Commands may work differently depending on model and signal. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) ENGLISH ENG Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 1 0 1 0 1 20(decimal) * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Physical/Major Channel Number Only (One Part Channel) - 66 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1.
EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
