OLED TV OLED65G6* OLED77G6* AA CR2032 b OLED65G6* a X4 (M10 X L70) X2 (M4 X L10) X2 OLED77G6* C X 18 (M4 X L12) www.lg.
OLED65G6* 1 2 3 a 4 5 6 b
OLED77G6* 1 2 3 4 5 6 C C
OLED77G6* 7 8 9 b 10
ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN LAN AUDIO OUT/ H/P OUT
LAN AUDIO OUT/ H/P OUT Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT : Depending on model / Selon le modèle / Dependendo do modelo /
AV IN VIDEO L/MONO AUDIO R COMPONENT IN AUDIO VIDEO
1 2 3 4 1 2 AA 1 2 3 3 : Depending on model / Selon le modèle / Dependendo do modelo / 4
0 1 2 E A B D F C A OLED65G6V-T OLED65G6T-T OLED65G6Y-T OLED77G6V-T OLED77G6T-T OLED77G6Y-T B C D E F 1461 883 243 892 68 31.7 1734 1055 317 1067 83 54.
*MFL69387422*
Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. *MFL69361156* www.lg.
Safety instructions Please read these safety precautions carefully before using the product.
ENGLISH Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating. Do not insert any metal objects/conductors (like a metal chopstick/ cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted.
Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. ENGLISH Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. If water enters or comes into contact with TV, AC adapter or power cord please disconnect the power cord and contact service centre immediately. Otherwise, this may result in electric shock or fire.
CAUTION There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Do not install the product on places such as unstable shelves or inclined surfaces.
ENGLISH Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.
When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (Deformation, corrosion or breakage).
Viewing 3D imaging (Only 3D models) ENGLISH CAUTION You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.
• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port. A A *A < = 10 mm *B < = 18 mm • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following illustration. Basic functions ENGLISH Power On (Press) Power Off (Press and hold)1 Volume Control • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
WARNING • Using cabinets or stands recommended by the manufacturer of the television. • Only using furniture that can safely support the television. • Ensuring the television is not overhanging the edge of the supporting furniture. • Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. • Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
CAUTION Provided item ENGLISH • Fold the AV box or remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • To install the wall mount, switch the selector to WALL TYPE as shown in the figure below. (Only OLED77G6*) AV box fixing supporter / Wall mount spacer Wall mount spacer X2 X2 X2 NOTE • Fold the AV box and attach the AV box fixing supporter / wall mount spacer to the AV box before installing the product on a wall mount.
Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). • Use a signal splitter to use more than 2 TVs. • If the image quality is poor, install a signal amplifier properly to improve the image quality. • If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. • An antenna cable and converter are not supplied.
Battery installation WARNING ENGLISH A B A (POWER) Turns the TV on or off. You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV. Adjusts the volume level. Scrolls through the saved programmes. (MUTE) Mutes all sounds. * By pressing and holding the button, audio descriptions function will be enabled. (Depending on model) B Returns to the previous level. Clears on-screen displays and returns to TV viewing. (HOME) Accesses the Home menu.
ENGLISH C A D B A (POWER) Turns the TV on or off. You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV. Number buttons Enters numbers. Enters letters. (Depending on model) Accesses the saved programmes list. (Space) Opens an empty space on the screen keyboard. (Depending on model) (Screen Remote) Displays the Screen Remote. * Accesses the Universal Control Menu. (Depending on model) B Adjusts the volume level. Scrolls through the saved programmes.
Licenses D ENGLISH Used for viewing 3D video. (Only 3D models) Turns the twin mode on or off. (Depending on model) (INPUT) Changes the input source. * Pressing and holding the button displays all the lists of external inputs. (Q. Settings) Accesses the Quick Settings. * Pressing and holding the button displays the All Settings menu. Teletext buttons ( , ) These buttons are used for teletext. Views the information of the current programme and screen. Control buttons ( , ) Controls media contents.
Troubleshooting Specifications Cannot control the TV with the remote control. Wireless module specification • Check if the product is turned on. • Check if the power cord is connected to a wall outlet. • Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. • Check the power control settings. The power supply may be interrupted. • Check if the Sleep Timer / Timer Power Off is activated in the Timers settings.
CI Module1 (W x H x D) ENGLISH Environment condition 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
Regulatory ENGLISH WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • • • • Using cabinets or stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL For any Suggestion, Opinion, Complaints, Please Call 800 54 in UAE 0800 545454 in South Africa 080 100 54 54 in Morocco 19960 in Egypt 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG key CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 (PC)EXTERNAL CONTROL DEVICE SETUP (PC) (TV) (TV) Phone jack Type (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV. 1 3 (PC) (PC) 1 3 2 2 - or (TV) (TV) (TV) (TV) 1 3 (PC) (PC) SERVICE ONLY ONLY SERVICE ENGLISH ENG RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p. 7) 03. Screen Mute k d (p. 7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 * Commands may work differently depending on model and signal. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) ENGLISH ENG Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 1 0 1 0 1 20(decimal) * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Physical/Major Channel Number Only (One Part Channel) - 66 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1.
EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
