LGESL_PC12_ENG_MFL40699308 ENGLISH MODEL : PC12 (PC12-UA) iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
There is so much your Hi-Fi system can do iPod DOCKING Go to page 6 Lull me to sleep and wake me up Go to page 9 Play CDs and USB Go to pages 6 & 8 Contents Setting up (Back Panel) About Player About Remote control Listening to CDs iPod DOCKING Listening to music from your portable player Listening to the radio Connecting your portable USB player Recording Setting the Clock Use your player as an alarm clock Fall asleep while listening to your player Mood Lighting About MP3/WMA Safety Precaution Troublesho
Setting up (Back Panel) ENGLISH Plug the AC power Cord into a wall socket PHONES (Headphone jack) Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones. Connecting headphones (not supplied) will switch off the speakers. a. Before connecting the AC power cord, check whether the operating voltage of your unit is identical with the voltage of your local power supplied. b.
About Player ALARM (SNOOZE) With the ALARM function you can turn CD play and radio reception on at a desired time. (see Use your player as an alarm clock) CD slot loader • Do not push a disc forcibly into the CD slot. • Do not pull or push a disc while a disc is ejected. • Press Z EJECT again to reinsert the disc after ejecting it. Z EJECT Ejects or inserts the CD from the slot loader. CLOCK (SNOOZE) For setting the clock and checking the time. (see Setting the Clock) -TUNING+ / .
About Remote control Turn on or off Press 1 for longer than 3 seconds as the device is powered on, you can move into POWER SAVE MODE. To change the INPUT functions Change the functions among PORTABLE, IPOD. • Fall asleep while listening to your player • Mood Lighting To change the functions Change the functions among FM, CD, USB.
Listening to CDs iPod DOCKING You can listen to music by connecting iPod to the player. Connect iPod to “iPod DOCK” on the upper part of the player. Audio CD and MP3/WMA CD can be played back in this player. ON PLAYER 1. Insert the CD: The display will show the total number of tracks (files). 2. Select the CD function: 3. Start the CD playing: 4. To stop a CD playing: ON REMOTE Z EJECT FUNC/INPUT FUNCTION x B/x x B/x B/[] x ENTER 1. Select the iPod function: 2. “IPOD” displays: 3.
Listening to the radio - more you can do Listening to music from your portable player Look for radio stations automatically Press ./> on either the player or the remote control for more than 0.5 second. The tuner will scan automatically and stop when it finds a radio station. The player can be used to play the music from many types of portable player. Delete all the saved stations Press and hold x ENTER on the remote control for two seconds. “ERASE” shows.
Recording Connecting your portable USB player Record FM or PORTABLE source to USB Connect USB to the player before recording. The advantage of connecting your portable USB player through the system’s USB port is that the portable device can be controlled from the system. Connect the portable player to the system using a USB cable (not supplied). 1. Select the USB function: 2. The display will show “READ”, followed by the number of files displayed: 3. Press: 4.
Fall asleep while listening to your player Setting the Clock ON PLAYER 1. Turn the power on: 2. Press for at least 2 seconds: 3. Choose from either: 12HR (for an am and pm display) or 24HR (for a 24 hour display). 4. Confirm your selection: 5. Select the hours: 6. Press: 7. Select the minutes: 8. Press: 1 /]] CLOCK ./> CLOCK ./> CLOCK ./> CLOCK Press SLEEP on the remote control repeatedly, the display changes in the following order, SLP OFF - LIGHT - corresponding icons. Press .
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Troubleshooting Symptom Specifications Cause Correction General No power. The power cord is not plugged in. Check whether electricity failed. No sound. Check whether you select right function. Plug in the power cord. Check the condition by operating other electronic devices. Press FUNC/INPUT (FUNCTION) and check the selected function. An unplayable disc is inserted. The disc is dirty. Insert a playable disc. Clean the disc. CD The unit does not start playback.
P/NO : MFL40699308
