Owner's Manual

> Indicator appears on the display window while the hold function of
the remote control is working.
>
Indicator appears on the display window while the hold function of
main unit is working.
(However, the buttons on the remote control can be worked.)
> Indicator appears on the display window while the hold function of
the remote control and main unit is working.
(All buttons on the remote control and main unit can not be worked.)
* If pressing a button during the Hold function is working, the Hold display window
appears for two seconds on the display and then disappears.
HOLD Function
* This function locks the main unit to prevent it from operating when you
accidentally press a button.
* Unlock it before operating.
Use of Earphone
Insert the remote control connection wire to
the remote control terminal of the main
unit after connecting both earphone and
remote control as shown at the right.
Volume Control
Yon can adjust volume level of earphone
by pressing VOL. (VOLUME) + or - button
on the remote control or main unit.(0~40)
> Pressing shortly is adjusted by a step,
while pressing long is adjusted
consecutively.
> You can find the result from the
display window.
Side of Remote Control
Button of main unit
Use of Earphone / Volume Control