Owner's Manual

19
ENGLISH
HUMIDIFIER FUNCTION
HUMIDIFIER FUNCTION
This maintains the optimal level of humidity when the indoor air is dry.
Check the assembly condition
of humidifier filter
1. Pull out the water tank.
2. Pull out the tray.
• Carefully lift the tray up to pull it out
without spilling the water.
3. After assembling both ends of the
humidifier filter case to the tray
hook accurately as shown in the
picture, assemble the tray to the
main unit.
• If the humidifier is not accurately
assembled, it can cause abnormal
noise and the humidifier may not work.
Supplying water to water tank
1. Open the cap of the water tank and
fill tap water to the water tank.
• Fill the water to the water tank to the
level of no water leakage when the cap
is closed.
• Do not use anything other than
tap water. It is difficult for bacteria
to grow in tap water because it is
treated with chlorine. But it is easy
for fungus or bacteria to grow in
other types of water (Well water,
purified water, mineral water etc.).
• Do not use hot water above 40°C,
aroma oil, chemical, contaminant
and air freshener. (It can cause
malfunction or failure.)
• Because the water tank can fall over,
always hold the water tank with two
hands.
CAUTION