OWNER'S MANUAL LG CineBeam DLP Projector Please read the safety information carefully before using this product. PH30N www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
CONTENTS ENGLISH LICENSES 3 Open Source Software Notice Information 4 SAFETY PRECAUTIONS 5 PREPARATION 16 INSTALLATION 23 REMOTE CONTROL 28 USING THE PROJECTOR 30 CONNECTING DEVICES 33 SPECIFICATIONS 36 SYMBOLS 40 TROUBLESHOOTING 41
LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together, DTS 2.0 Channel, DTS 2.
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
SAFETY PRECAUTIONS WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN T he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
For places where oil or oil mist can reach, do not install the product on a wall or ceiling. • The product may be damaged and fall. Do not allow a child to hang or climb on the installed projector. • The projector may fall and cause injury or death. When installing the product on the ceiling, observe the following precautions to prevent the projector from falling: —— Contact the Customer Support Center for installation.
CAUTION ENGLISH When moving the projector, be sure to turn off the power switch and disconnect the power plug, antenna cable and the connection cord between the devices. • A failure to do so may cause damage to the projector or the cord, resulting in a fire or electric shock. Do not install the projector on a shaky shelf, a slanted place, a place subject to vibrations, a place where the projector is not fully supported or on a fabric such as tablecloths.
When in Use WARNING If there is a gas leak from the gas lines, do not touch the outlet and be sure to vent by opening the window. • Sparks may be caused and lead to a fire or burns. When using the product with an external device such as a game console connected, keep the length of the connection line enough. • The product may fall over and cause injury or product damage. Do not scratch or give an impact on the projector with metallic materials or objects.
Keep the plastic wrapping of the product out of the reach of children. • If a child misuses it, it may suffocate the child. Do not touch near the vents during the operation or immediately after the power is turned off as they generate intense heat. • The heat does not indicate a defect or a problem of the projector when it is operating so use it with confidence. ENGLISH Do not look into the front of the lens when the projector is operating.
CAUTION Do not use any product that uses high voltage electricity near the projector. (e.g. An electric fly swatter) • It may cause a malfunction. The surface of the AC adapter is hot, so be careful not to put the surface against your skin or let the children touch the surface during use. (Except for the models that do not use an adapter) Do not hold or move the projector upside down by grabbing only the power cord, signal cable, or projection mirror.
Do not block the light from the projector lens with a person, book or other objects. • If the light from the projector shines on an object for a long time, it can cause fire due to the heat of such light. Also, the reflected light can heat the lens and cause damage to the projector. ENGLISH Do not mix old and new batteries together. • It may cause battery rupture or fire due to liquid leakage or may cause electrical shock.
Power WARNING Make sure the power plug is securely plugged in to prevent it from shaking. • If the connection is unstable, it may cause a fire. Do not insert a metal object such as chopsticks into the other end of the power plug while it is plugged into a wall outlet. Also, do not touch the power plug immediately after unplugging it from the outlet. • It can cause an electric shock. Connect the power plug to a grounded outlet or multi-tap.
ENGLISH If any of the following occurs, it could be a malfunction of the product, so you must immediately turn the projector off, unplug the power cord from the outlet, and contact the service center: —— When the product is damaged; —— When the product fails; —— When there is a foreign substance inside the product; or —— When the product smokes or smells. • It may cause a fire or electric shock. CAUTION Do not unplug or plug the power plug from/in the outlet while the power switch is on.
Cleaning WARNING Do not spray water directly onto the projector when cleaning it. • It may cause a fire or electric shock. How to clean the projector —— Disconnect the plug from the outlet before cleaning. —— Do not wipe the optical system (the lens and mirror) immediately after the power is turned off. —— Do not spray the water with a sprayer on the product or wipe the product with a damp cloth. —— Wipe the product gently with a soft cloth.
PREPARATION The pictures may differ slightly from the actual product. Accessories ENGLISH Accessories included with the projector are show below. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Two AAA Batteries Owner's Manual AC-DC Adaptor Power cord AAA: Due to the environment government regulations about import and batteries destruction in Colombia, projectors will not bring the batteries of remote control included.
Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice.
Parts and Components Buttons Outlet Vent1) ENGLISH Speaker Inlet Vent Lens2) Focus Ring 1) Due to the high temperature of vent area, do not get close to the vent area. 2) Do not touch the lens when using the projector. The lens may be damaged. (Keep lens away from sharp objects.
1 2 4 3 5 6 7 ENGLISH 1 2 3 4 Battery Charge Indicator —— Red: Charging —— Green: Charging complete / Switch : Turns the projector on and the projector goes into Standby mode. —— : Turns the projector off completely. Place the switch to when you move the projector or when you intend not to use the projector for long periods of time.
Using the Buttons You can operate the projector by pressing the button. Basic functions ENGLISH , , , Power On Press the Power button once while the projector is off. Power Off (Press and Hold) Press and hold the Power button for a few seconds while the projector is on. Up/Down/ Left/Right Sets functions or moves the cursor.
Adjusting the menu Press the Power button once while the projector is on. Press the top, bottom, left, and right buttons to move to a menu item. After moving to the desired menu item, press the Power button once to select it. Displays the Settings menu. [INPUT] Changes the input source. [POWER OFF] Turns the power off. [CLOSE] Clears on-screen displays and returns to projector viewing.
Projector Status Indicators LED Power Indicator ENGLISH LED Power Indicator Red Power standby state Off The projector is operating with the power on.
INSTALLATION Projection Distance per Screen Size 1 Place the projector on a sturdy, level surface, together with the PC or audio/ 3 4 video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen. If the projector is not at a right angle, the projected image will look distorted.
16:9 Aspect Ratio Screen Size Screen Width (Y) Screen Height (X) Projection Distance (D) ENGLISH inches mm inches mm inches mm inches mm 25 635 21.8 554 12.2 311 32.6 830 30 762 26.1 664 14.7 374 39.2 996 40 1016 34.8 886 19.6 498 52.2 1328 50 1270 43.5 1107 24.5 623 65.3 1660 60 1524 52.2 1328 29.4 747 78.4 1992 70 1778 61.0 1550 34.3 872 91.4 2324 80 2032 69.7 1771 39.2 996 104.6 2657 90 2286 78.4 1992 44.1 1121 117.
Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. Adjust the focus of the image by rotating the Focus Ring to the left or right. Make sure the product does not move when adjusting the focus.
How to Install the Projector On a Tripod ENGLISH • You can install the projector using a camera tripod. • As shown below, you can mount the projector instead of a camera on the tripod. • When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm (0.1 inches) or less. The maximum size allowed for the locking bolt is 5.5 mm (0.2 inches). (If it is longer than the maximum allowed size, it may damage the projector.
Kensington Security System ENGLISH • This projector has a Kensington Security Standard connector as an anti-theft mechanism. Connect a Kensington Security System cable as shown below. • For more information on installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. • The Kensington Security System is an optional accessory.
REMOTE CONTROL Open the battery cover on the back of the remote control and insert the batteries which are specified in the battery room with poles pointing in the correct direction. The new and same type of batteries (1.5 V AAA) must be used. 1 2 ENGLISH CAUTION • Do not mix new batteries with old ones. (POWER) Turns the Projector on or off. (INPUT) Changes the input source. Accesses USB mode. / Adjusts the Keystone function. Up/Down/Left/Right buttons Sets the function or moves the cursor.
ENGLISH NOTE • When using the remote control, the optimal operation range is 6 meters (19.6 feet) or less (left/right) and within a 30 degree arc of the remote control IR receiver. • If a cable is connected to the back port, the optimal operating range is 3 meters (9.8 feet) or less (left/right) and within a 30 degree arc of the remote control IR receiver. • For seamless operation, do not block the IR receiver.
USING THE PROJECTOR Using The Battery ENGLISH • It is displayed when the battery is low. • If the screen shows a low battery message, be sure to charge the battery.
ENGLISH • It is displayed when the battery is running out. • As your battery is running out, the projector will turn off immediately. • If the battery runs out, the projector can only be turned on after it has been connected to a power supply.
Battery using time information ENGLISH Status Time and Display Charging About 2 hours (When in standby and charging) Usage Hours Up to 2 hours (Available battery using time up to 2 hours when Energy Saving mode set to Max.) Battery Level Indicator Step Step 1 Step22 Step Step Step 33 Step Step 44 Step Step 5 Full Full • If you do not intend to use the projector for a long time, leave the battery charged at 40 % to 50 %.
CONNECTING DEVICES You can connect various external devices to the projector. Connecting with a HDMI Cable Optional Extras NOTE Connecting a PC/ Notebook • The projector supports Plug and Play. Your PC will automatically detect the projector and requires no driver installation. ENGLISH Connect an HD receiver, DVD, PC, Notebook, or external devices to the projector and select an appropriate input mode. With an HDMI cable, you can enjoy high quality picture and sound.
Connecting Headphones You can listen to the audio through a headphone.
Connecting a smart device (smartphone, tablet, etc.
SPECIFICATIONS MODEL ENGLISH Resolution (Pixel) Aspect ratio Projection distance —— Screen Size Ratio of upward projection Working range of the remote control Power consumption AC-DC Adaptor Audio Output Height Width Depth Weight USB Device Environment Condition PH30N (PH30N-GL) 1280 (Horizontal) × 720 (Vertical) 16:9 (Horizontal:Vertical) 830 mm to 3321 mm (32.6 inches to 130.7 inches) —— 635 mm to 2540 mm (25 inches to 100 inches) 100 % 6 m (19.6 feet) (Max.
HDMI (PC) Supported mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1152 x 864 54.348 60.053 1280 x 720 45.00 60 1280 x 1024 63.981 60.02 1440 x 900 55.935 59.888 1400 x 1050 65.317 59.979 1600 x 900 60 60 1680 x 1050 65.29 59.954 1920 x 1080 67.
HDMI (DTV) Supported mode Resolution 480p ENGLISH 720p 1080i 1080p Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.47 60 31.47 59.94 31.50 60 45.00 60.00 44.96 59.94 33.75 60.00 33.72 59.94 67.500 60 67.432 59.939 27.000 24.000 26.97 23.976 33.75 30.000 33.71 29.97 • To provide the best picture quality, a 720p resolution is recommended.
Other specifications Risk Group 2 CAUTION Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to the eye. ENGLISH This label is attached to the bottom of the product and language may differ.
SYMBOLS Refers to alternating current (AC). Refers to direct current (DC). ENGLISH Refers to class II equipment. Refers to stand-by. Refers to “ON” (power). Refers to dangerous voltage.
TROUBLESHOOTING Please check the list below when you experience the following symptoms during use of the product. It may not be a failure. Does your device have any of the following issues? • The projector does not display anything on the screen or output sound when it is turned on. • The product emits smoke or a burning smell. • Water or foreign substances are present inside the product. • Part of the projected image is cut out.
ABOUT LG PROJECTOR Image shown may differ from your projector. Your projector’s OSD (On Screen Display) may differ slightly from that shown in this manual. [ ] : the buttons and the text to be displayed on the projector screen. P/NO : SAC37813560 (2004-REV01) Copyright © 2020 LG Electronics Inc. All Rights Reserved.
2 CONTENTS USING THE PROJECTOR 3 ENTERTAINMENT 7 ENGLISH MY MEDIA 13 CUSTOMIZING SETTINGS 26
3 USING THE PROJECTOR Watching Projector The menu screen display in this owner’s manual is an example to help users understand how to operate the product and may look different from the actual screen. 1 2 3 4 5 6 Connect the power cord correctly. Place the / switch on the rear port area to and press the (POWER) button on the projector or on the remote control. (If the switch is placed to , the projector will not turn on.) In the Language Selection screen, select a language.
4 Additional Options Adjusting Aspect Ratio ENGLISH Resize an image to view at its optimal size by pressing (RATIO) while you are using the projector. • Press the (Settings) button on the remote control and select [PICTURE] [Aspect Ratio]. • Available picture size may differ depending on the input signal. • [4:3] Resizes images to the previous standard 4:3. • [16:9] Displays an aspect ratio of 16:9. • [Zoom] Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
5 Using the Keystone Function To prevent the screen image from becoming trapezoidal, [Keystone] adjusts the top and bottom width of the image if the projector is not set up at a right angle to the screen. Because the [Keystone] function may cause inferior screen image quality, use this function only when it is not possible to set up the projector at an optimal angle. 2 Press the or button to adjust the picture. • [Keystone] can be adjusted from -40 to 40. Press the (BACK) button when done.
6 Changing Input Device To select an external input ENGLISH Selects external input. The illustration of the menu may differ from the actual screen on the product. • Press the (INPUT) button on the remote control to display the input selection screen. • Select an input signal using the remote control's (INPUT) button to connect the projector to the desired input. You can use the or button to switch between all the input modes.
7 ENTERTAINMENT NOTE • When using the SCREEN SHARE function, it is compatible with Miracast supported devices with Windows 10 or higher, but it may not be compatible with some PCs. • Ice Cream Sandwich, Jellybean, Kitkat, Lollipop, Marshmallow and Nougat versions of LG’s Android devices are guaranteed to be compatible. • When connecting via SCREEN SHARE, place the device close to the projector. • The response rate and image quality may vary depending upon the user’s environment.
8 Setting Up Bluetooth on the Projector This option is used to output sound from the projector through Bluetooth audio devices. • Press the (Settings) button on the remote control, and then set [Bluetooth] to [On] in the [WIRELESS] menu. ENGLISH NOTE • The devices that can be connected are as follows: LG BTS1, LG HBS-700, LG HBS-730, LG HBS-800 (Models available for purchase may vary by region.) • Products from other manufacturers may not be compatible.
9 Searching for Bluetooth Devices and Connecting Go to (Settings) [WIRELESS] [Bluetooth] [Search Devices] to search for nearby Bluetooth audio devices and then connect any detected devices to the projector. (If the device name is longer than 20 characters, only the first 20 will be displayed.) 1 ENGLISH Set the Bluetooth device to pairing mode and then select [Search Devices]. • If the device has not been detected, check that the device is powered on and in pairing mode.
10 2 When the search is complete, you can select a Bluetooth device and connect to it. • The time it takes to connect to a device may vary according to the signal strength and the number of devices. ENGLISH 3 When a Bluetooth device is connected, you will hear sound from the projector through the connected device. • The connected Bluetooth device will be added automatically to the [Search Devices].
11 Connecting or disconnecting bluetooth devices In (Settings) [WIRELESS] [Bluetooth] [Search Devices], Bluetooth devices are shown in the order that they were connected, and the same devices can be reconnected simply by selecting them without having to search for them again. Connecting Disconnecting Select [Disconnect] to disconnect the device. • Connected devices can only be disconnected from [Bluetooth] [Search Devices] [Detail Info] (Settings) [WIRELESS] [Disconnect].
12 Adjusting AV Sync. Adjust When a Bluetooth device is connected, go to (Settings) [WIRELESS] [Bluetooth] [AV Sync. Adjust] to adjust the synchronization between the video and the Bluetooth headset sound. • This feature is only available when a Bluetooth device is connected. • Audio sync may vary by manufacturer.
13 MY MEDIA Before Using ENGLISH Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below.
14 Tips for using a USB device ENGLISH • If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work. • Some USB storage devices may not work or may work incorrectly. • If you use a USB extension cable, the USB device may not be recognized or may not work properly. • Use only USB storage devices formatted with the Windows FAT32 or NTFS file system.
15 To Use My Media 1 Connect a USB storage device. 2 Press the button on the remote control to select your desired function, and then press then press . . Select the located on the top left of the screen, and ENGLISH 3 4 5 Select the files you want to play. (When you select more than one file, they will play in the order they were selected.) Press the (Settings) button on the remote control. Use the left or right button on the remote control to select [Play] and press the button.
16 My Media supporting file • Maximum data transmission rate: 20 Mbps (Mega bit per second) • External supported subtitle formats: *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.
17 Video Supported Codec Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p) Extension .avi .mp4 .m4v .mov .mkv .ts .trp .tp .m2ts .vob .mpg .mpeg Video VC-1 Advanced Profile, VC-1 Simple and Main Profiles Audio WMA Standard, WMA 9 Professional Video H.264/AVC Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital Video H.264/AVC, MPEG-4 Part 2 Audio AAC Video H.264/AVC Audio HE-AAC, Dolby Digital Video H.
18 Audio File File type MP3 ENGLISH AC3 MPEG AAC, HEAAC CDDA Item Bit rate Sampling rate Bit rate Sampling rate Bit rate Sampling rate Bit rate Sampling rate 32 Kbps to 320 Kbps 32 kHz to 48 kHz 32 kbps to 640 kbps 32 kHz, 44.1 kHz, 48 kHz 32 kbps to 448 kbps 32 kHz to 48 kHz 24 kbps to 3844 kbps 8 kHz to 96 kHz Bit rate 1.44 kbps Sampling rate 44.1 kHz Bit rate LPCM Info Sampling rate 1.41 Mbps to 9.6 Mbps Multi-channel: 4 4.1 kHz, 88.2 kHz / 48 kHz, 96 kHz Stereo: 176.
19 Available photo file File type BMP PNG Info Support File type Base-line, Progressive Picture Size Minimum: 64 x 64 Maximum: Base-line: 1920 (W) x 1080 (H) Progressive: 1024 (W) x 768 (H) Picture Size Minimum: 64 x 64 Maximum: 9600 (W) x 6400 (H) Support File type Interlace, Non-Interlace Picture Size Minimum: 64 x 64 Maximum: Interlace: 1280 (W) x 800 (H) Non-Interlace: 9600 (W) x 6400 (H) • BMP and PNG format files may be slower to display than JPEG.
20 Watching the Videos In the [MOVIE LIST], you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Tips for Playing Video Files ENGLISH • Some subtitles created by users may not work properly. • The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have the same name.
21 Browsing Movie List Play a video file stored from a connected device. ENGLISH 1 2 3 4 5 6 7 8 1 Plays the previous/next file. 2 Returns to normal playback and Pauses the media player. ( / ) 3 Stops playing. 4 Whenever this button is pressed, the playback speed is changed.: x2, x4, x8, x16, x32 5 Selects repeat play. • [One]: Only one file is played repeatedly. • [Sequence]: Selected files are played in order. • [Random]: Selected files are played randomly.
22 Viewing the Photos In the [PHOTO LIST], you can watch photos stored on the connected USB device. Supported Photo Files ENGLISH PHOTO (*.JPEG) Baseline: 64-pixel (width) x 64-pixel (height) - 1920-pixel (width) x 1080-pixel (height) Progressive: 64-pixel (width) x 64-pixel (height) - 1024-pixel (width) x 768-pixel (height) • Only JPEG files are supported. • Non-supported files are displayed in the form of an icon.
23 Browsing Photo List Play a photo file stored from a connected device. ENGLISH 1 2 3 4 5 6 7 8 1 Plays the previous/next file. 2 Returns to normal playback and Pauses the media player. ( / ) 3 Stops playing. 4 Rotates photos. • Rotates a photo 90°, 180°, 270°, 360° clockwise. • Photos cannot be rotated if their width is greater than the height of the max. supported resolution. 5 Selects repeat play. 6 You can listen to music while viewing photos.
24 Listening to Music In the [MUSIC LIST], you can play audio stored on the connected USB device. Supported Music Files ENGLISH *.MP3 Bit rate range: 32 Kbps to 320 Kbps • Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz • Sampling rate MPEG2 Layer3: 16 kHz, 22.
25 Browsing Music List You can play audio files stored on the connected device. ENGLISH 1 2 3 4 5 6 7 1 Plays the previous/next file. 2 Returns to normal playback and Pauses the media player. ( / ) 3 Stops playing. 4 Whenever this button is pressed, the playback speed is changed.: x2, x4, x8, x16, x32 5 Selects repeat play. 6 Play List 7 Returns to the music list screen.
26 CUSTOMIZING SETTINGS Settings • Press the (Settings) button. ENGLISH [PICTURE] Adjusts the image quality for optimal viewing. [AUDIO] Sets the sound mode. [TIME] Sets time-related settings. [WIRELESS] Wireless-related features. [OPTION1] Customizes the general settings. [OPTION2] Customizes the settings related the projector. [INPUT] Selects the desired input source. [MY MEDIA] Accesses photo, music, and movie files.
27 PICTURE Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [PICTURE] and press the 3 , or button to set up the desired item and press the To return to the previous menu, press the (BACK) button. ENGLISH 4 button. Use the , , button.
28 ENGLISH • [Picture Mode] Selects the picture mode optimized for the viewing environment or the program. —— [Vivid] Maximizes the visual effect of video. Heightens contrast, brightness, and sharpness to display vivid images. —— [Standard] Displays images in standard levels of contrast, brightness, and sharpness. —— [Cinema] Optimizes the image for a movie. —— [Expert] Menu for adjusting picture quality that allows experts and amateurs to enjoy the best projector viewing.
29 ENGLISH • [Aspect Ratio] Resizes the picture. • [Energy Saving] Reduces power consumption by adjusting peak screen brightness. —— [Minimum]/[Medium]/[Maximum] Applies the pre-set [Energy Saving] mode. • [Color Temperature] Adjusts the overall color of the screen to suit your preference. Select [Warm], [Medium], [Cool] or [Natural].
30 AUDIO Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [AUDIO] and press the 3 ENGLISH 4 button. Use the , , button. , or button to set up the desired item and press the To return to the previous menu, press the • [Sound Mode] Sets the sound mode. —— [Standard] Suitable for all types of video. —— [Music]/[Cinema]/[Sports]/[Game] Sets audio optimized for a specific genre. (BACK) button.
31 TIME Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [TIME] and press the 3 , or button to set up the desired item and press the To return to the previous menu, press the (BACK) button. • [Sleep Timer] Turns off the projector after a preset number of minutes. To cancel the [Sleep Timer], select [Off]. • [Auto Off] If there is no input signal or button press, the projector automatically turns off after the preset time has elapsed.
32 WIRELESS Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [WIRELESS] and press the 3 ENGLISH 4 button. Use the , , button. , or button to set up the desired item and press the To return to the previous menu, press the (BACK) button. • [SCREEN SHARE] The SCREEN SHARE displays the screen of the connected device. You can check the [My Device Name]. • [Bluetooth] Sound is output through the Bluetooth headset. First, set [Bluetooth] to [On].
33 OPTION1 Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [OPTION1] and press the 3 , or button to set up the desired item and press the To return to the previous menu, press the (BACK) button. • [Language] Selects a desired Menu Language. • [Initial Setting] Resets all the projector settings to the factory default. Do not turn off the power during initialization. • [Mode Setting] Selects [Standard] or [Store Demo]. When in use in home, please select [Standard].
34 OPTION2 Settings 1 Press the (Settings) button. 2 Use the , , , or buttons to select [OPTION2] and press the 3 ENGLISH 4 button. Use the , , button. , or button to set up the desired item and press the To return to the previous menu, press the (BACK) button. • [Keystone] To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not set at a right angle to the screen.
35 ENGLISH • [PJT Mode] This function turns the projected image upside down or flips horizontal. —— When the [Auto Keystone] function is set to [On], only the [Front] and [Rear] settings are available. • [High Altitude] If the projector is used at an altitude higher than 1200 meters, turn this on. Otherwise, the projector may overheat or its protection function may be activated. If this happens, turn the projector off and then on again after waiting for several minutes.
