OWNER’S MANUAL Portable Bluetooth Speaker Please read this manual carefully before operating your set and retain it for future reference. MODELS PL5/PL5W MFL71484110 2005_Rev01 www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 NOTICE: For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product. Check the specification page of this owner’s manual to be certain of the current requirements. CAUTION when using this product in environments of low humidity Do not overload wall outlets.
Getting Started Symbols ~ 1 0 Refers to alternating current (AC). Refers to direct current (DC). Getting Started Refers to class II equipment. 1 Refers to stand-by. ! Refers to “ON” (power). Refers to dangerous voltage.
Table of Contents 5 Table of Contents 1 1 Getting Started 3 Troubleshooting 2 6 6 7 8 Safety Information Unique features Introduction Front Rear 31 Troubleshooting 4 Appendix 2 Operating 32 33 34 Trademarks and Licenses Handling the Unit Specifications 9 9 9 10 11 11 11 11 12 14 15 16 17 17 18 19 19 Charging the speaker – Charging with the AC adapter – Checking the charging status – Checking Battery status Basic Operations – Using power button – Bluetooth Connection – Bluetooth LED status
1 Getting Started Unique features Introduction Auto Power Off Symbol used in this manual Getting Started This unit supports to turn off by itself for saving energy consumption. (Page 30) AUX (Portable In) Listen to music from your portable device. (Smart phone, Notebook, etc.) BLUETOOTH® Listen to music stored on your Bluetooth device. LG XBOOM LG XBOOM is an app designed to let you take control of some of LG’s latest audio devices.
Getting Started 7 Front c e f 1 d Getting Started b a g h i j k a Battery LED b Power LED c Bluetooth LED d SOUND BOOST LED e 1 Turns On / Off: Press it. * If the power turned on, you can check the battery status by pressing the 1 button for 2 seconds. f j - Adds a Bluetooth device for multi phone pairing. (Press and hold j for 2 seconds) - Changes to Bluetooth mode in AUX mode. (Press j) * When you connect the 3.5 mm stereo cable, the function is changed to AUX mode.
Getting Started Rear 1 Getting Started a b c d e f g h i j a Port cover h RESET button b Multi Mode LED (MAIN) i c Multi Mode LED (OTHER) d Dual Mode LED e 3 MULTI Connects multiple speakers for Multi Mode. (Page 28-29) f 3 DUAL Connects two speakers for Dual Mode. (Page 26-27) g Changes mood light. (Page 16) (DC IN) USB (C type) port for charging j AUX Listens to music from your portable device.
Operating Charging the speaker Charging with the AC adapter This speaker uses built-in battery. Before using it, charge the battery by connecting the AC Adapter. 1. Connect the supplied USB cable to the AC adapter. Checking the charging status When speaker's battery is charging, you can check the charging status by Battery LED. LED Green Green Description Off Off Battery is fully charged. 2 (DC IN) port of the 3. Plug the AC power cord into an AC outlet. Battery is charging.
Operating Checking Battery status If the power turned on, you can check the charging status by pressing the 1 button for 2 seconds. Then Battery LED light will change depending on battery charging status. LED Description 2 Green Green Battery LED turns on green. Operating Amber Amber Red Red Battery LED turns on amber. Battery LED continuously blinks in red and sounds once.
Operating 11 Basic Operations Bluetooth LED status Check the Bluetooth LED blinks before connecting Bluetooth device. Using power button 2 Operating LED Power On / Off Press the 1 button. Bluetooth Connection LG-PL5(XX) Status Description Bluetooth LED blinks with the sound. Searching for Bluetooth device. Bluetooth LED turns on with the sound. Bluetooth device is connected. ,,Note yy In AUX mode, Bluetooth LED turns off.
Operating Simple Operation Guide Function 2 How to Status Operating Power On Press the 1 button. Power LED turns on with the sound. Power Off Press the 1 button. Power LED turns off with the sound. Bluetooth pairing When Bluetooth LED blinks, select LG-PL5 (XX) from device list on your Bluetooth device. Bluetooth LED turns on with the sound. Multi phone pairing Press and hold j for 2 seconds to add another Bluetooth device. During the search for another device, the Bluetooth LED blinks.
Operating 13 Function How to Status Dual Mode LED of the Main speaker turns on with the sound. And then Dual Mode LED of the Other speaker turns on with the sound. Multi Mode Press the 3 MULTI button. And then press 3 MULTI repeatedly to select MAIN or OTHER. After selecting Main or Other, the speakers is connected with beep sound after 3 seconds. Bluetooth Initialization Press and hold j for 7 seconds. Power and Bluetooth LED blinks 4 times.
Operating Handsfree Function You can receive incoming call on your Bluetooth device to this unit. Connect the unit to a Bluetooth device. ,,Note yy During Handsfree Function, Voice Command is not supported. yy Only smartphone is available to use this function. yy To adjust the call volume, press P, O buttons on the unit. yy In Dual Mode and Multi Mode, you can receive a call on only main speaker due to audio howling.
Operating 15 Voice Command You can speak to operate the voice command of your smartphone through speaker’s microphone by using the voice command app or the Siri. ,,Note Make sure use the smart device that has voice command. ,,Note yy During Handsfree Function, Voice Command is not supported. yy When voice command time limit exceeded on smart devices, this function automatically cancel.
Operating Mood light You can turn on mood light on this unit. When you press the button, the mood light settings will be appeared in the order as below. Function Description Party Various colors light turns on. Water Blue tone light turns on. Forest Yellow tone light turns on. 2 My style Operating Off To enable My Style option, you have to customize with “LG XBOOM” app. Mood light turns off. ,,Note yy If you play the music, Mood light is synchronized to the music.
Operating 17 Sound Effect Sound Effect is optimally tuned in UK's high-end audio company MERIDIAN. MERIDIAN technology provides wide sound field and powerful sound. You can select a desired sound effect by using SOUND BOOST button. 2 Operating Setting Sound effect Off / LED Function Standard SOUND BOOST Description You can enjoy High-fidelity sound with balanced and natural. You can enjoy the wide sound field and powerful sound.
Operating Listening to Music from Your External Device The unit can be used to listen to the music from many types of external device. 1. Turn the power on by pressing 1 button. 2. Connect the external device to the AUX (3.5mm) connector of the unit. 3. Turn the external device on and start playing. ,,Note yy When you connect the 3.5 mm stereo cable, the function is changed to AUX mode automatically.
Operating 19 Using BLUETOOTH® wireless technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. Connecting individual devices under Bluetooth wireless technology does not incur any charges. A mobile phone with Bluetooth wireless technology can be operated via the Cascade if the connection was made via Bluetooth wireless technology.
Operating 3. Select “LG-PL5 (XX)”. LG-PL5(XX) ,,Note yy When using Bluetooth technology, you have to make a connection between the unit and the Bluetooth device as close as possible and keep the distance close. However you may experience issues in the cases below: -- There is an obstacle between the unit and the Bluetooth device. 2 Operating ,,Note yy XX means the last two digits of Bluetooth address.
Operating 21 Controls connected Bluetooth device You can control connected Bluetooth device from the unit; play, pause, skip, volume ,,Note yy Only Android OS and iOS is available to use this function. yy This function may not be supported depending on the Bluetooth device, or operated differently.
Operating Multi phone pairing 3. Select "LG-PL5 (XX)" from device list on another Bluetooth device. The unit can be connected to 2 Bluetooth devices at the same time. LG-PL5(XX) Pairing with Two Devices 2 1. Connect the unit to a Bluetooth device. (Page 19-21) Operating 2. When the Bluetooth device and unit are connected, press and hold j button for 2 seconds. -- Then the speaker is connection with 2 Bluetooth devices. 4.
Operating 23 ,,Note yy When you use Dual Mode, the multi phone pairing connection is not supported. Press 3 DUAL button to cancel Dual Mode. yy When you use Multi Mode, the multi phone pairing connection is not supported. Press 3 DUAL button to cancel Multi Mode. yy When you turn off the Main speaker or connect 3.
Operating Using the "LG XBOOM" App ,,Note It is recommended to use the latest version of app. 2 Operating About “LG XBOOM” App Install “LG XBOOM” App onto Your Bluetooth Device There are two ways to install “LG XBOOM” App onto Your Bluetooth Device. Install “LG XBOOM” App through QR code 1. Install “LG XBOOM” app through QR code. Use the scanning software to scan the QR code. “LG XBOOM” app brings a suite of new features to this unit.
Operating 25 Install “LG XBOOM” App through “Google Android Market (Google Play Store)” or “Apple App Store” 1. Tap the “Google Android Market (Google Play Store)” or “Apple App Store” icon. 2. In the search bar, type in the “LG XBOOM” and search it. 3. In the search result list, find and tap “LG XBOOM” to start downloading Bluetooth app. yy Make sure that your Bluetooth device is equipped with “Google Android Market (Google Play Store)” or “Apple App Store”.
Operating Dual Mode Connection You can enjoy the sound in stereo by using two speakers. For enjoying Dual Mode, you need to purchase another speaker. 2. If two speakers are successfully connected, blinking Dual Mode LEDs will stay white. First hear beep sound at main speaker, and then at other speaker. 2 Operating 1. Press the each speaker’s 3 DUAL button. Then the speakers are ready to Dual Mode. - speaker: Main speaker is to set L (Left) channel and turns on Dual Mode LED and Bluetooth LED.
Operating 27 ,,Note yy When you enjoy Dual Mode, Multi phone pairing is not supported. -- Main speaker ( ) connects only one Bluetooth device. yy In Dual Mode, you can connect only the main speaker( ) with the Bluetooth device. yy If you turn the power off and then on again, two speakers need to be reconnection for using Dual Mode. yy When Dual Mode connection is on processing, you cannot search the units on other Bluetooth devices.
Operating Multi Mode Connection 3. If multiple speakers are connected, blinking Multi Mode LEDs will stay white with beep sound. You can enjoy the Multi Mode sound by using multiple speakers. For enjoying Multi Mode, you need to purchase another speaker. 2 Operating - speaker: Main speaker turns on Multi Mode LED and Bluetooth LED. - speaker: Other speaker turns on Multi Mode LED. Bluetooth LED turns off. ,,Note yy It takes up to 1 minute to connect to Multi Mode. 1.
Operating 29 5. Repeat steps 1-2 to add speaker you want. - speaker: Selects MAIN. - speaker: Selects OTHER. 2 Operating ,,Note yy When you enjoy Multi Mode, Multi phone pairing is not supported. -- Main speaker ( ) connects only one Bluetooth device. yy In Multi Mode, you can connect only the main speaker( ) with the Bluetooth device. yy If you turn the power off and then on again, each speakers need to be reconnection for using Multi Mode.
Operating Other Operation Resetting 2 If have a malfunction with the speaker, press the RESET button using an object like a thin pin. Then speaker turns off. Press 1 button to try turning on speaker again. Notice for Auto Power Off When the unit is in Bluetooth mode without music playback for 6 hours or in AUX mode without button operation for 6 hours, this unit is turned off automatically. The function can be turned on or off.
Troubleshooting 31 Troubleshooting Problem Cause & Correction No Power. yy The battery is discharged. Recharge the battery. yy Connect the unit to the power supply with the AC adapter. yy The unit or your smart device’s volume is set to minimum. Check and adjust the volume of the unit or Bluetooth device’s volume. No sound or sound distortion. yy When you use an external device at high volume, the sound quality may be deteriorated. Lower the volume of the devices.
Appendix Trademarks and Licenses Compatible iPhone/iPod yy The unit supports the models as follows ; -- iPhone XS Max -- iPhone XS -- iPhone XR -- iPhone X -- iPhone 8 Plus The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.
Appendix 33 Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix Specifications General Power requirements 5 V 0 2 A (AC adapter) Built-in rechargeable battery Power consumption Refer to the main label. Dimensions (W x H x D) Approx. 201 mm X 79 mm X 79 mm (7.91 inch x 3.11 inch x 3.11 inch) Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 60 % RH Water-proof IPX5 Inputs AUX (Portable in) 4 0.5 Vrms (3.5 mm stereo jack) Battery Appendix Battery capacity 3900 mAh Operating time Approx. 18 hours.
