Owner's Manual

OPERATION SETTING

ENGLISH

AI / Auto operation

Auto operation’s initial desired temperature is 25°C.

The cooling exclusive model’s initial desired temperature is “It’s Fine”.

Cooling/heating model’s desired temperature can be controlled in the units of 1°C or 0.5°C.

For cooling exclusive model, the value can be controlled from “hot” stage to “cold” stage.

- Hot

- A little hot

- It’s fine

- A little cold

- Cold

- If you unit is operating in ai/auto mode and you press the [On/Off] button the ai/auto operation

will shut off.

NOTE

If the product is a cooling/heating model, in the auto operation, the desired temperature can

be selected in the range of 18°C ~ 30°C.

If it does not operate as you wish, select another operation mode.

Fan Only Operation

Fan only operation’s initial wind strength is “High”.

Fan only operation does not have a separate desired temperature.

- If you unit is operating in fan only mode and you press the [On/Off] button the the unit will stop.

NOTE

It provides the Fan only operation without temperature control, with recirculation of indoor

air.