Owner's Manual

27
TEMPERATURE SETTING
26
OPERATION SETTING - VENTILATOR
ENGLISH
OPERATION SETTING - VENTILATOR
Operation mode
Ventilation (general and direct cooling type ventilation) operation mode supports the following op-
eration modes.
※Some products may not support some operation modes.
In the main screen, press [<,>(left/right)] button to select the operation mode category, and press
[∧,∨(up/down)] button to set the operation mode.
※The direct cooling type ventilation’s air conditioner operation mode is composed separately
from the ventilation operation mode.
Mode Classification Description
Auto
Ventilation operation
mode – commonly
supported by ventila-
tion products
It measures the ventilation system’s indoor tempera-
ture and the outdoor temperature for the automatic op-
eration in the optimal ventilation mode state.
Heat Exchange
It is the mode of ventilation with both supply/discharge
through the heat exchanger. It is adequate to use in
summer/winter where the indoor/outdoor temperature
difference is big.
Bypass
It is the ventilation where the exhausted air is ventilated
without going through the exchanger. It is adequate to
use in spring/fall or when the indoor contamination is
severe.
Cool
Air conditioner opera-
tion mode – supports
direct cooling type
ventilation
Cools down the room to desired temperature.
Heat It provides warm air to the room.
Auto
The product automatically provides the appropriate fan
speed based on the temperature of the room.
Stop It stops the product’s air conditioner operation.
TEMPERATURE SETTING
Controlling Desired Temperature
You can easily control to the desired temperature.
• In the main screen, press [<,>(left/right)] button to select the desired temperature category,
and press [∧,∨(up/down)] button to set the desired temperature.
- In the cooling, heating, and AI/auto mode, the desired temperature control is possible.
Mode Description
Cool
If the desired temperature is higher than the indoor temperature, the
cooling is not performed.
Set the desired temperature lower than the indoor temperature.
You can select in the range of 18°C ~ 30°C (16°C ~ 30°C).
Heat
If the desired temperature is lower than the indoor temperature, the heat-
ing is not performed.
Set the desired temperature higher than the indoor temperature.
You can select in the range of 16°C ~ 30°C.
AI / Auto
For cooling/heating product, you can select in the range of 18°C ~ 30°C.
For cooling exclusive product, you can select Hot, A little hot, Adequate,
A little Cold, and Cold.
NOTE
!
The favorable temperature difference between the indoor temperature and the outdoor
temperature is 5°C.