Owner's Manual

HOLD SETTING

HOME LEAVE SETTING

ENGLISH

HOME LEAVE SETTING

Home leave (Unoccupied Mode)

The "Home Leave" function enables proper operation of indoor unit when a space is left for a pe-

riod of time.

This feature can only be used when Control type setting is set to the Dual Set Point Control

mode

NOTE

User can not change indoor unit status with wired remote controller while set 'home leave

mode' except for 'home leave mode' release control.

• Home leave mode will be released if indoor unit operation was changed by commands of

other controllers(central controller, drycontact and wireless remote controller).

• When occupied schedule event occurs while operate a home leave mode, home leave

mode will be released and indoor unit status follow the occupied schedule event.

• Indoor unit operation change as below when the home leave mode is released.

- The setpoints and operation mode values are reflected in the control events of the

scheduled events that are currently applied.

- If there are no schedule events, the setpoint shall be applied as last setpoints before the

home leave operation.

- If there are no setpoints before the 'home leave' operation(dehumidification or fan mode),

default values will be applied to the setpoints.

- Default values : dual setpoint auto , heat 60 °F(16 °C), cool 86 °F(30 °C)

HOLD SETTING

Hold

User can use this function when they want to manage indoor unit as home leave control mode

only.

NOTE

Can not change indoor unit status with wired remote controller while set ‘hold mode' except

for ‘hold mode' release control.

• Hold mode will be released if indoor unit operation was changed by commands of other

controllers(central controller, drycontact and wireless remote controller).

• A scheduled event is not applied to the indoor unit during a hold mode, even if a scheduled

event is set.