Owner's Manual

FUNCTION SETTING

ENGLISH

Defrost mode setting (air conditioner / DX ventilator)

Change the outdoor unit’s defrost mode operation.

• Select value using [<,>(left/right)] button.

Value

Step 0 Not use

Step 1 Forced snow removal

Step 2 Quick defrost

Step 3 Forced snow removal + quick defrost

NOTE

The Defrost mode setting function can be set only when the installer setting’s outdoor unit

function M/S setting is set to “Master”.

Defrost mode setting function is only available in some products.

Smart load control(SLC) setting (air conditioner / DX ventilator)

Change the outdoor unit’s Smart Load Control stage value.

(Smart load control is the function to calculate the indoor air temperature, outdoor air tempera-

ture, and humidity to operate effectivly.)

• In the function setting list, select the Smart load control category, and press [OK] button to

move to the detail screen.

- When SLC is Operating, on the expanded screen’s monitoring information, ‘In Smart load con-

trol’ is displayed.

Value

Off Step 0

Step 1

Step 2

Step 3

NOTE

Smart load control function can be set only when the installer setting’s outdoor unit function

M/S setting is set to “Master”.

Smart load control function is only available in some products.