Owner's Manual

FUNCTION SETTING

ENGLISH

Delay time (exclusive for ventilation)

It is the function to set the ventilation operation to start after the delay time.

• In the function setting list, select the delay time category, and press [OK] button to move to the

detail screen.

- After setting the minute, press [OK] button to move to the upper level list.

Value

0 ~ 60 Minutes

Midnight air cooling (ventilation interface)

It is the function to discharge indoor air and supply cool outdoor air into the indoor during sum-

mer nights to save energy.

• In the function setting list, if you select midnight outdoor air cooling category and press [OK]

button, it moves to the detail screen.

- When you set the start and end time and press [OK] button, it saves and moves to the upper

level list.

NOTE

Whether to run the midnight air cooling is decided only when both air conditioner and

ventilation are stopped.

• Even if it is the set midnight air cooling time, it enters the midnight air cooling only when

the outdoor temperature conditions is met.

• During the midnight air cooling operation, “in midnight outdoor air cooling” message is

displayed on the monitoring screen.

• Midnight air cooling function may not work in some products.

CAUTION

. If you do not use the function, please set it as off.