Owner's Manual

101
USER SETTING
100
USER SETTING
ENGLISH
On condition / Off condition
It is the function to set to use the information managed by the wired remote controller as the
contact point control condition to widen the usage of the contact point (Digital Output) installed in
the remote controller.
• In the external device setting list, select the On/Off condition setting category, and press [OK]
button to move to the detail screen.
• The External device operates as the operation set in the conditions 1~3.
• If the External device is set to auto while both ON condition and OFF condition are not set, con-
tact point OFF is output.
• If the ON condition and OFF condition are the same, it is finally processed as OFF condition.
OK
Condition 1 Condition 2 Condition 3 Condition 4
None Deactivate - Deactivate
Aircon
On -
External device name On
External device name Off
Cool mode -
Heat mode -
Fan mode -
Dry mode -
Auto mode -
Current Temp. 1°C~ 39.5°C
Over
Under
Occupied - -
Unoccupied - -
Date setting
Set the date displayed on the remote controller.
• In the user setting list, select the date category, and press [OK] button to move to the detail
screen.
• After the setting, if you press [OK] button, the setting is saved and moves to the previous
screen.
OK