Owner's Manual

109
SERVICE SETTING
ENGLISH
108
USER SETTING
System restart
Restart the remote controller.
• In the user setting list, select the system restart setting category, and press [OK] button to
move to the detail screen.
- In the detail screen, when you press [OK] button, a popup message is displayed, press the
check button, to restart the system.
- For forced reset, press down [On/Off + Back] button for 5 seconds to restart the system.
OK
SERVICE SETTING
How to enter service setting
To enter the menu displayed at the bottom, you need to enter the service setting menu as fol-
lows.
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press [OK]
button to move to the setting list.
• In the setting list, select the service setting category, and press [OK] button to move to the
service setting list.
Service setting
• You can set the product service functions.
• Some functions may not be displayed/operated in some product types.
OK
Menu Description
Service contact
Check and input the service center phone number that you can call
when there is service issue.
Model Information
Check the indoor/outdoor product group and capacity information to
which the remote controller is connected.
RMC Version Information Check the remote controller model name and software version.
Error History View the connected indoor unit’s error history.
Open Source License View the remote controller’s open source license.