CRC2 Series Controllers Owners Manuals
36
MultiSITE CRC 2 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Heat Settings
Press the Heat Settings button on the Installer screen to display the 1/3 Heat Settings screen.
Disable(0)
1/3 Heat Settings
Ext Aux Heat(25)
Aux Heat Ctrl(21)
HP First(0)
Prim Heat Ctrl(36)
Disable(0)
Enable (1)
Floor Temp
Using the Up and Down arrows select
between Disable, Non-Ducted and
Ducted.
Use this function to enable or
disable auxiliary heat control.
Select between Primary Heat First and
Primary Heat Last.
Parameter Parameter Settings Denition
Ext Aux Heat (25)*
Default value = Disabled(0)
Enables use of an external
auxiliary heat kit
Aux Heat Cntrl(21)* This control is used to enable related control on MORE screen
Default value = Disabled(0)
Enables or disables the
auxiliary heater
Prim Heat Cntrl(36)
Default value = HP First(0)
Enables or disables the primary
heater
Floor Temp
Default value = Enable(1)
temperature sensing
*Note: To set Aux Heat control, the following controls must be set following this sequence:
enable FC-21, then enable FC-25, wait 10 seconds then enable FC-18.
Installer