Install Instructions

Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

ACCESSORIES INSTALLATION

Ceiling/Wall Sensor Installation

1. Pull out the battery isolation strip.

2. Attach the sensor to a wall or ceiling, observing the following:

• Recommended ceiling mount height is 8.2 ft.

• Recommended wall mount height is 4 ft.

• For wall mounting, ensure that the base plate is attached to the wall with the TOP

arrow up.

• For wood or plastic surfaces, use either the adhesive pads or the mounting

screws. (If using screws, pre-drill a 1/32 in hole.)

• For metal surfaces, use the adhesive pads only. For ceiling mounting, using

screws is recommended.

3. Attach the sensor to the base plate.

• Insert the hooks on the base plate into the slots on the sensor.

• Turn the sensor body clockwise to lock the sensor to the base plate.

• An instruction is printed on the side of the sensor body to help with attachment.

• For wall mounted sensors the temperature and humidity sensor holes should be

at the bottom once the sensor is installed.

Figure 38: Ceiling/Wall Sensor Installation

Ø 1/32 in