PREMTBVC Owners Manual

ManualsBrandsLG ManualsAccessoriesCRC2 Plus MultiSite Remote Controller

MultiSITE CRC 2 Controller

Due to our policy of continuous product innovation, some specifications may change without notification.

CONFIGURATION SCREENS

Schedule Screen

Press the Schedule button on the Home screen to display the Schedule Screen. There are different schedule setting screens, one

for each day of the week (7 days) titled accordingly. Each can have different scheduled events where the room controller is set for set point,

system mode, fan speed and occupancy status. Five (5) separate events can be configured per day. The CRC2 now supports the ability to

disable all schedules without deleting them via Disable schedules control on the More screen.

--:--

****day Schedule

--:--

Delete

--:--

Copy to

Adjust the time in the left column by pressing on the

Up and Down arrows. To configure the System mode

for the time selected tap on the right column.

Tap the left-hand button to set

the time for scheduled event.

When the time for a new event

is configured, the default sys-

tem mode of “Off” will appear

in the event overview portion of

the control on the right side.

Tap the right-hand side button

to enter the next screen.

74°F

70°F

Monday 06:00 AM

Setpoint cool

Setpoint heat

Auto

System mode

Fan speed

Occ. / Unocc.

Medium

Occupied

Up to 5 separate events per day can

be configured. User can set cooling

and heating set points, system mode

(Off, Dry, Cool, Heat, Fan and Auto),

fan speed and Occupied/Unoccupied

status.

This typical schedule screen shows the parameters that can be adjusted for a specific time and day in a week.

Once the event has been fully

configured, press the left ar-

row to be returned to the daily

schedule overview screen.