PREMTBVC Owners Manual
35
User Interface Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Fan Settings
Press the Fan Settings button on the In-
staller screen to display the Fan Settings
screen.
Press the right arrow button to display the
second page of the Fan Settings screen.
Press the right arrow button on the
second Fan Settings screen to display the
third page of the Fan Settings screen.
Note:
Refer to the IDU’s engineering manual for
static pressure values.
0
3/4 Fan Settings
ESP slow (3)
ESP medium(3)
ESP low (3)
0
ESP high(3)
0
ESP power(3)
0
0
Parameter Parameter Settings Denition
ESP slow (3) Refer to ducted indoor unit
values
For ducted indoor units only. Provides granular adjustment
in static pressure. Function codes 5, 6, and 32 cannot be
used when Fan Settings ESP is used.
To use function codes 5, 6, and 32 for fan settings, all
settings on this screen must be zero (0).
ESP low (3)
ESP medium (3)
ESP high (3)
ESP power (3)
Cooling Occ (67)
Cooling Unocc (67)
Heating Occ (67)
Heating Unocc (67)
Couples fan speed with occupancy status during thermally
be individually set for each of the four Mode/Occupancy
settings. Available on systems that support occupancy.
Fan Speed(67) 0 = “Disabled (function 67)”
1 = “Fan Low”
2 = “Fan unchanged”
Disable
4/4 Fan Settings
Cooling Occ (67)
Heating Occ (67)
Cooling Unocc (67)
Off
Heating Unocc(67)
Low
No Chng
Installer