PREMTBVC Owners Manual
41
User Interface Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Enable(1)
12 x 6
Detection Area
Step/Off
Unocc Control
30 min
Step Time
3/3 Accessories
Human Detection
10 Sec
Sensing Freq
Normal
Sensitivity
CONFIGURATION SCREENS
Parameter Parameter Settings Denition
Human Detection
0 = “Disable (0)”
1 = “Enable (1)”
2= “90° Instl (2)”
Default value = Disable (0)
Enables use of Human Detection features
when this option is installed on a Dual Vane
4-Way Cassette
Sensing Freq
0 = “30 sec (0)”
1 = “5 sec (1)”
2 = “1 min (2)”
3 = 3 min (3)”
Default value = 30 sec (0)
Sets the interval at which the Human
Detection sensor will check for occupancy
Sensitivity
0 = “Normal (0)”
1 = “Low (1)”
2= “High (2)”
Default value = Disable (0)
Detection sensor
Detection Area
0 = “12 x 6”
1 = “6 x 6”
2= “Flr Det”
Default value = 12 x 6
Used to set the detection area for Human
Detection option
Unocc Control
0 = “Disable (0)”
Default value = Disable (0)
Detection sensor detects unoccupied
unoccupied with IDU returning to On state
Step Time
min”, 3 = “15 min”, 4 = “60 min”, 5 = “90 min”,
Default value = 30 min
Sets the incremental setpoint change (or
“step”) time for Unocc Control when set to
Installer
Features on the 3/3 Accessories screen
are available when Human Detection
option is installed on Dual Vane 4-Way
Cassette.
Accessories – continued
Press the right arrow button on the 2/3 Accessories screen to display the 3/3 Accessories screen.