PREMTBVC Owners Manual
46
MultiSITE CRC 2 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Wi-Fi Configuration
Press the Wi-Fi Config button on the Network Configuration screen to display the Wi-Fi settings screen. Only one BACnet protocol can be
used at a time, either the wired protocol BACnet MS/TP or the Wi-Fi BACnet IP. When the Wi-Fi card is installed, BACnet IP (wireless) will be
used. The BACnet controls available under the Network Config section will be a reduced set of controls compared to when using BACnet
MS/TP.
Parameter Parameter Settings Denition
Module Status
Read Only
Initializing, Ready, Fail
The status is always displayed as Ready when
the Wi-Fi module is installed.
MAC address:
90:70:65:f9:06:16
Device name:
rc8X00_0617
Module status
Ready
1/4 Wi-Fi
Firmware version:
1.0.1 B12
Push t o Restart Wi-Fi
The device name can be set and edited
Firmware version of the
Wi-Fi module
MAC address of the Wi-Fi module
Restart Wi-Fi button
from the Configuration Web Page
Ready