PREMTBVC Owners Manual

47
User Interface Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
CONFIGURATION SCREENS
Wi-Fi Configuration continued
Parameter Parameter Settings Denition
Access Point 0 = Disabled
1 = Enabled

Enables Wi-Fi AP mode on the remote controller

mobile phone or other device.
SSID (controller
provided)
N/A SSID of the Access Point (AP) created by the Wi-
Fi card for connecting to it from another device to

Password (controller
provided)
N/A Password of the Access Point (AP) created by
the Wi-Fi card for connecting to it from another

IP address (controller
provided)
N/A IP Address of the Access Point (AP) created by
the Wi-Fi card for connecting to it from another

Password:
IP address:
192.168.71.1
65F90617
SSID:
SE8X00_0617
Access Point
Enabled
The SSID of the Access Point created
by the Wi-Fi module. You can add
your device to this network to access
The password needed
to connect to the Access
Point Wi-Fi network
When connected to the Access
Point, browse to this IP address
Page
to access the Configuration Web
the Configuration Web Page
Enabled
Access Point
2/4 Wi-Fi Access Point
