PREMTBVC Owners Manual

51
User Interface Guide
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Sensors
Press the Sensors button on the Zigbee Ecosystem screen to be taken to the Sensors screen. Before pairing sensors, ensure Network status
shows “Online” and Permit join is set to “On.” When Zigbee wireless sensors is successfully paired with the controller, it will appear as a
new Device screen, up to a maximum of 20 Devices. Press the left and right arrow keys to move between Device screens. After pairing each
sensor, set the appropriate type of sensor using the Function control and the up and down arrow keys. A sensor can be removed from the
network by choosing the Remove option in the Function control.
Addr:000D6F000BF6711F
Status: Closed
Function
Comm. status
Battery
Device 1
Window
Normal
Online
Addr: FFA00313
Temperature 70°F
Function
Comm. status
Battery
Device 20
Env. data
Normal
Online
Humidity: 30%RH
CO2: 471PPM
Up to 20
separate wireless
sensors can be
paird, each with
its own Device
screen
MAC address
of sensor
CONFIGURATION SCREENS
Zigbee Ecosystem
Network status
Permit join
Permit timeout
Sensors
Online
180 min
On
1Paired devices