Owner's Manual

HOW TO CLEAN

ENGLISH

How to clean the sensor

Open the sensor cover on the rear side of the product.

Clean the lens with a soak cotton swab with little water and wipe again with a dry cotton swab.

CAUTION

• Do not clean the main body control part and display part with alkali detergent.

• Do not clean the surface of the air purifier using sulfuric acid, hydrochloric acid or organic

solvent (thinner, kerosene and others). Do not put stickers on the surface. It may damage

surface of the product.

•

Wipe with soft cloth when cleaning. There may be exterior damage by scratching or others.

• When cleaning the product, do not let water get into the product inside. Turn off power

and unplug the power cord before cleaning. (Always check whether fan is moving.)

CAUTION

Do not clean the sensor with other materials other than alcohole or water. It may cause prod-

uct failure.

How to clean exterior

Wipe the air purifier with a soft cloth wrung out in warm water. Especially, the air inlet around

can accumulate dust. Clean periodically.

How to clean the ﬁlters

Filter type Classification Cleaning cycle How to clean

Dual Protection

filter

For washing

About 1 month

cycle cleaning

Clean the Dual Protction Filter with a vac-

uum cleaner or brush, etc., and if the con-

tamination is severe, wash with water.

Allergy

HEPA Filter

For replace-

ment

About 12

months cycle

replacement

* The replacement cycle for Allergy HEPA

Filter and Triple Care Filter may be differ-

ent according to the usage environment.

Triple Care Filter

1,MFL68181325,영영 2017. 8. 31. 영영 3:06 Page 20