Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 3828VA0288M (MP015A, cover require 089K TX, and quote this infor- service.
Contents Installation 3 Location and function of controls Remote control handset Internal generator charge Front panel / Side panel 4 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function / Auto Demonstration On screen language selection (option) 7 On 8 screen menus Menu selection up TV stations Auto programme tuning Manual programme tuning Fine tuning Programme edit Calling the programme table 9 Setting Picture adjustment PSM (Picture Status Memory) / Pi
Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms ial and mains or powercuts, please pull out the aer- plugs. Warning To prevent fire moisture. or shock hazard, do not expose the set to rain or Service Never remove the back high voltage properly, unplug it very cover of the set as this can expose you to and other hazards.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel 1 Before you use the remote control handset, teries. See the next page. 123 2 1. 456 78 9 0 EYE I/II 2. PICTURE 3 MENU SOUND 4 VOL T U R B O 3. VOL PR PIP 4. MUTE 5. SWAP SCAN TIME standby or directly select a number. language during dual language (option) broadcast. a menu.
Location and function of controls 9. POWER switches the set on from 10. EYE switches the eye function standby on or or off to standby. off. POWER TV/AV 9 11. TURBO SOUND BUTTON selects Turbo sound. TURBO PICTURE BUTTON selects Turbo picture. 1 2 3 4 5 6 7 8 9 12. MUTE switches the sound on or 0 off. 13. TELETEXT BUTTONS (option) These buttons are used for teletext. For further details, see the 'Teletext' section. 10 EYE I/II PICTURE MENU SOUND T U R B O 11 PR 14.
Location and function of controls Front ? panel PT-48/53A82 series PR DIGITAL INDEX O V OG UC 4 C 8 PR L MENU R 2 VOL PR O PR L OL POR C LS OK RS DGTLNDEX R MNU 56 OK LSS TVAV OL CATV ONOFF TV/AV VOL 9 7 3 ON/OFF 11 ? 1 PT-43A82 series 10 8 PR PR OL L C R LSS OL S-VIDEOL/MN AUDIO DIGTLDEX OOR MNU OK R V/AV ONOFF AV3 9 (Side panel) 11 1. MAIN POWER (ON/OFF) switches the set on or off. 2. Φ / 4. REMOTE CONTROL SENSOR 9.
Basic operation On and off 1. 2. 3. 4. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. Press the POWER button on the remote control handset. The set reverts to standby mode. Press the main power button again to switch the set off.
On screen menus The an dialogue operator also between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection 1. 2. 3. Repeatedly press 4. Change the MENU button to display each menu. Press the Γ button and then Δ / Ε button to select a menu item. Press the Γ button to display the sub menu or the pull-down menu. the setting of an item in the sub or Φ/ΓorΔ/Ε.
Setting up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the Δ / Ε or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations Auto programme can CH. AutoOprogramme ManualOprogramme { ProgrammeOedit { Language { Station Menu { be stored.
Setting up Station Menu CH. AutoOprogramme ManualOprogramme { ProgrammeOedit { Language { ()O{OOKOMENUOTV TV/AV { TV stations Manual programme tuning Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. AV the MENU button to select the Station menu. button and then Δ / Ε button to select Manual 1. Repeatedly press 2. Press the 3. programme.
Setting up Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. 3. 4. 5. 6. 7. TV stations CH. 1 to 3. Press the Δ / Ε button to select Name. Press the Γ button on the Name pull-down menu. Press the Δ button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the Ε button you can select in the opposite direction. Select the position by pressing the Φ / Γ button and then take your choice of the second character, and so on. Press the OK button.
Setting up Station Menu CH. AutoOprogramme ManualOprogramme { ProgrammeOedit { Language { ()O{OOKOMENUOTV AV { Programme TV stations edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. 2. 3. the MENU button to select the Station menu. button and then Δ button to select / Ε Programme edit. Press the Γ button to display the Programme edit menu.
Setting up Calling TV stations the programme table can check the programmes stored in the memory the programme table. You Displaying programme table Press the LIST button to display the Programme by displaying table menu. The programme table appears on the screen. One programme table contains ten programmes as below. 0O-O-O-O-O- TV/AV O05O SO 6O9 1O CO 0O3OO06O SO 1O7 2O CO 1O2OO07O SO 2O2 3O SO 6O6OO08O CO 0O9 4O SO 6O7OO09O CO 1O1 ()O}{OOKOMENUOTV Note AV : a.
Picture Picture Menu CH. PSM { User { 100Hz { C onvergence { ()O{OOKOMENUOTV adjustment PSM (Picture Status Memory) 1. Repeatedly press the MENU button 2. 3. to select the Picture menu. Press the Γ button and then Δ / Ε button to select PSM. Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu. { Dynamic User { Standard 100Hz { Mild C onvergence { Game PSM CH. AV User TV/AV ()O}OOKOMENUOTV 1 2 3 4 5 6 7 8 9 4. 5.
Picture adjustment Convergence This function enables you to adjust the colour convergence of screen during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour ghosts (red, green, blue). This problem can be solved by adjusting the colour convergence. 1. Repeatedly press the MENU button to select the Picture menu. 2. Press the Γ button and then Δ / Ε button to select Convergence. 3. Press the Γ button to display the Convergence menu.
Sound Sound Menu CH. SSM { Balance { AVL { ()O{OOKOMENUOTV AV SSM adjustment (Sound Status Memory) You can select your preferred sound setting; Dolby Pro Logic (PT-48/53A82 series only), Dolby Virtual, Music, Movie or Sports and you can also adjust the sound frequency of equalizer. 1. 2. 3. the MENU button to select the Sound menu. Press the Γ button and then Δ / Ε button to select SSM. Press the Γ button and then Δ / Ε button to select a sound setting SSM pull-down menu.
Sound Dolby Virtual Dolby Virtual lets you experience panoramic Sound Frequency Adjustment a. Press the Γ button in User to display adjustment CH. effects of sound. the User sub { Balance { AVL { Sound Menu SSM menu. ()O{OOKOMENUOTV AV 0.1O0.5O1.5O5.0O10OkHz ()O}{O OKOMENUOTV AV b. Select a sound band by pressing the Φ / Γ button. Make appropriate sound level with the Δ / Ε button. d. Press the OK button to store it for the sound User. The display Stored appears. TV/AV c.
Sound adjustment Sound output selection In AV mode, you can speakers. select output sound for the left and right loud- Repeatedly press the I/II button to select the sound output. : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loudspeaker. L+L : Audio signal from audio L input is sent to left and right loudspeakers. R+R : Audio signal from audio R input is sent to left and right loudspeakers.
Other functions TV and AV modes CH. be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Inputs can { { AutoOsleep { BlueOback { Special Input ChildOlock Menu Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. ()O{OOKOMENUOTV 1. 2. 3. the MENU button to select the Special menu. Press the Γ button and then Δ / Ε button to select Input.
Other functions Special Menu CH. Input { ChildOlock { AutoOsleep { BlueOback { Auto sleep If you select On on the Auto sleep pull-down menu, the set will switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. automatically ()O{OOKOMENUOTV AV 1. 2. 3. 4. TV/AV 1 2 3 4 5 6 7 8 9 Blue back If you select On on on MENU 4. PR VOL OK VOL PR the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
PIP Option PIP is operation (option) : an optional function, so that only the set with PIP function can operate. PIP (Picture in Picture) displays a picture within a picture. On and off Press the PIP button to switch on the sub press this button again to switch it off. Input mode selection for sub Press the INPUT button to select the picture. picture input Each time this button is pressed, each displayed as shown below. mode for the sub input picture.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. a set free service broadcast by most TV stations which gives information on news, weather, television programmes, share prices and many other topics. Teletext is a up-to-the-minute The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3.
Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE 1 2 3 Selects double height text. enlarge the top button again to enlarge Press this button to 4 5 6 Press this 7 8 9 page. Press this button again half of the page. the bottom half of the to return to the normal display.
Connection of external You can connect additional equipment, such as equipment VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. (R)-AUDIO-(L) VIDEO COMPONENT1 COMPONENT2 (480i) OUT S-VIDEO AUDIO AV2 (480p) (L) (L) (R) (R) AV1 Y Y PB PB AUDIO R (8‰) VIDEO R (8‰) (8‰) L MAIN SPEAKER MONO VIDEO PR PR SURROUNDL (8‰) SPEAKER ANT IN LL 75‰ DVD INPUT Aerial socket VCR 1.
Connection of external Euro scart socket (R)-AUDIO-(L) 1. VIDEO COMPONENT1 COMPONENT2 (480i) OUT S-VIDEO AUDIO AV2 (480p) (L) (L) (R) (R) Y Y PB PB PR PR AV1 AUDIO R VIDEO R (8‰) (8‰) L MAIN SPEAKER MONO VIDEO AV4 (8‰) LL 75‰ (8‰) SURROUNDL SPEAKER ANT IN 2. DVD INPUT 4 VCR equipment (option) Connect the Euro scart socket of the VCR to the Euro scart socket of the set. Press the PLAY button on the VCR.
Connection of external Speaker sockets (option) (PT-48/53A82 series equipment only) (R)-AUDIO-(L) VIDEO COMPONENT1 COMPONENT2 You can obtain speakers a Dolby Pro Logic Surround effect by connecting 4 (480i) OUT to SPEAKER sockets on the back of the set.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged Check aerial (broken lead?) into TV?) Check aerial Check for local interference Adjust c