Owner’s Manual
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- MY MEDIA
- 3D FUNCTION
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- MAINTENANCE
- SPECIFICATIONS
- KEY CODES
- EXTERNAL CONTROL DEVICE SETUP
- SYMBOLS
24
PREPARATION
ProjectionDistanceperScreenSize
1 Place the projector on a sturdy, level surface, together with the PC or
audio/video source.
2 Place the projector an appropriate distance away from the screen. The
distance between the projector and the screen determines the actual
size of the image.
3 Position the projector so that the lens is at a right angle to the screen.
If the projector is not at a right angle, the projected image will look
distorted. To correct the distortion, use the keystone function.
(See page 40.)
4 Connect the power cord of the projector and the connected device to
the wall outlet.
Ratioofupwardprojection:100%
X/2 X/2
Projection Distance (D)
Screen Height(X)
Screen
Y/2 Y/2
Projection Distance (D)
Screen Width (Y)
Screen