Owner’s Manual
Table Of Contents
- LICENSE
- SAFETY INSTRUCTIONS
- PREPARATION
- REMOTE CONTROL
- USING THE PROJECTOR
- ENTERTAINMENT
- MY MEDIA
- 3D FUNCTION
- CUSTOMIZING SETTINGS
- CONNECTING DEVICES
- MAINTENANCE
- SPECIFICATIONS
- KEY CODES
- EXTERNAL CONTROL DEVICE SETUP
- SYMBOLS
51
MYMEDIA
MYMEDIA
BeforeUsing
ConnectingaUSBDevice
Connect a USB device (external HDD, USB memory) to the USB port
of projector to enjoy the content les stored in the USB device with your
projector. You cannot write or delete data in the USB device. Connect a
USB ash drive as shown below.
USB Flash Drive
RemovingaUSBDevice
1 Click the Q.MENU button.
2 Use the or button to move to USBDevice and press the OK
button.
3 Select a USB to remove. Wait for conrmation that the USB device
has stopped before removing the USB.
• If detached early, an error may occur on the projector or the USB
storage device.
• Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
NOTE