User Guide

24
Smart ThinQ
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Android Phone Product Registration
If you are registering through an Android phone, the Product Registration Guide on the screen will display 3 steps. Go through the 3 steps of
the Product Registration Guide as shown on your smart phone.
Android Product Registration steps:
1. Point the remote control at the air conditioner unit and press the two buttons (as shown in Figure 15) simultaneously for 3 seconds.
2. Wait for the Wi-fi light to blink on the air conditioner unit. You will hear a beeping sound from the unit. The Wi-Fi indicator will blink for ap-
proximately 5-10 minutes to deliver network information. See Figure 16.
3. Select your wireless network and enter password if necessary. See Figures 18 and 19.
4. The Registration Complete screen displays. See Figure 22.
Figure 22:
PRODUCT REGISTRATION
Note:
Depending on your home network, connection to the unit could take up to 30 minutes. Refer to the Wireless Network Requirements section
of this manual for wireless requirements.