Owner's Manual

ADVANCED FUNCTIONS
15
ENGLISH
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
G
repeatedly to set the brightness
to the desired level.
Silent mode
It is to prevent potential claims by neighbors,
reducing noise from outdoor units.
The outdoor unit sound pressure in cooling
and heating mode is decreased by 3dB com-
pared to the rated sound pressure
1 Press | to turn the power on.
2 Press
C
.
-
I is displayed on the display screen.
Energy Control mode
It is Brings the effect of the power saving.
(Setting available in air cooling mode)
1 step : The power Input in cooling mode
is decreased by 25% compared
to rated power Input
2 step : The power Input in cooling mode
is decreased by 50% compared
to rated power Input
NOTE
!
• Setting available only under operation-ON
Silent Mode and E/Control are not avail-
able at the same time. If E/Control is
pressed under Silent Mode, Silent Mode is
released and E/Control works.
• Capacity may decrease when outdoor
unit silent mode is selected.
• In Air Circulation, Humidity mode, this
function cannot be used.
NOTE
!
• In Cooling mode, this function can be
used.
• Every time E/Control on wireless remote
controller is pressed, 1Step, 2Step, func-
tions release are repeated and switched
Wanted temperature appears for 5 sec.
• Capacity may decrease when outdoor
unit Energy Control mode is selected.
• According to protection logic, The 2step
may not be entered.
NOTE
!
This function may not be supported,
depending on the model.
Silent Mode Function available under the
below temperature set
- Cooling-possible temperature range: Indoor
18°C (64°F) ~ 30°C (86°F), Outdoor 18°C
(64°F) ~ 43°C (109°F)
- Heating-possible temperature range: Indoor
16°C (60°F) ~ 30°C (86°F), Outdoor 6°C
(43°F) ~ 24°C (75°F)
Energy Control mode Function available under
the below temperature set
- Cooling-possible temperature range:
Indoor 18°C(64°F) ~ 30°C (86°F),
Outdoor 21°C(70°F) ~ 36°C (97°F)
1 Step Entrance 2 Step Entrance
1 Press | to turn the power on.
2 Press
B
.
-
J is displayed on the display screen.