Owner’s Manual
Table Of Contents
ENGLISH
23
SMART FUNCTIONS
Using Smart Diagnosis
Using the Robot Cleaner to
Diagnose Issues
You can diagnose the current status of the robot
cleaner automatically using the Smart Diagnosis
function.
• If you experience problems with the robot
cleaner, run the Smart Diagnosis function and
use the results to help solve them.
1
Turn on the main power switch a of the robot
cleaner and dock the robot cleaner in the
home station.
• The Smart Diagnosis function is only
available while the robot cleaner is charging.
2
station that are in the way of the robot cleaner.
• During the Smart Diagnosis, the robot
cleaner moves around within an area
approximately 20 inches (50 cm) in diameter.
3
Press the Diagnosis button b on the remote
control and the process starts with a voice
message.
• The robot cleaner returns back to the home
station when the Smart Diagnosis has
finished.
4
The robot cleaner announces the result
through a voice message.
• To repeat the voice message, press the
Home button.
5
Press the Start/Stop button to terminate the
diagnosing process.
• After the Smart Diagnosis voice message,
the robot cleaner will begin recharging after
1 minute.
• If an error is detected with any of the
obstacle detection sensors during Smart
Diagnosis, a voice message will announce,
and the robot cleaner will not return to the
home station.
• If there is a problem while Smart Diagnosis
is running, the robot cleaner will provide the
diagnosis result from the home station and
the Smart Diagnosis will end.