Owner’s Manual

ManualsBrandsLG ManualsAppliancesCordZero ThinQ Robotic Vacuum with Ultra-Quiet Performance, Intelligent Cleaning, 5-Step HEPA Filtration System, Removable and Washable Filters, 7 Smart Cleaning Modes, in Matte Grey

ENGLISH

29

MAINTENANCE

Cleaning the Sensors and the

Charging Terminals

1

Place a soft cloth on the floor and place the

robot cleaner on top of the cloth.

2

Clean the 3D DUAL Eye of the robot cleaner

using a soft cloth.

• Be careful not to scratch the sensors.

3

Turn the robot cleaner over and clean the

cliff detection sensors a and the charging

terminals b using a cotton swab or a soft

cloth.

4

Clean the dust sensors on the robot cleaner

using a soft cloth.

5

Unplug the power cord of the home station

and clean the charging terminals of the home

station.

WARNING

• Pull out the power plug before cleaning

the charging terminals of the home station.

Failure to do so may cause an electric shock

or injury.

CAUTION

• If the sensors or the charging terminals are

damaged, discontinue use and contact an LG

Electronics Customer Information Center.

• Do not wipe the product with a volatile

solvent or an organic solvent (thinner,

solvent, acetone, etc.) Doing so will cause

product damage.

NOTE

• It is very important that the cliff sensors are

cleaned regularly to allow the robot cleaner to

detect surface level differences and prevent it

from falling over edges.