Owner's Manual

4
a
b
c
d
1 SCART connection
Connect the TO TV jack on the unit and your TV
using the SCART cable. You can enjoy audio from
an external source through your unit. Press
FUNC.(FUNCTION) repeatedly to select TV-AUDIO.
2 FM connection
FM - Connect the FM aerial.
The reception will be its best when the two loose
ends of the aerial are in a straight and horizontal
line.
3 Component Video connection
Connect the COMPONENT VIDEO
(PROGRESSIVE SCAN) OUTPUT jacks on the
unit to the corresponding input jacks on your TV
using a Y PB PR cable.
Hooking up the unit
Connect jacks on the unit and your TV (Digital Device and etc.) using the
cables. Check the jack of connection as follows.
Picture quality improves in order from Video out connection to Component video
connection.
4 Connect the speaker’s wires to the unit.
Connect the black end of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
To connect the cable to the each speakers, press
each plastic finger pad to open the connection
terminals on the back of each speaker. Insert the
wire and release the finger pad.
Connect the VIDEO OUTPUT (MONITOR) jack on
the unit to the corresponding input jack on your TV
using a Video cable.
Video Out connection
RBD154-F0U.DKAZLL_ENG_6113 8/5/09 10:42 AM Page 4