Owner's Manual

40
Timer
Recording
(Continued)
Checking
Timer
Recording
Details
Programming
can be checked whenever the Recorder
is turned on. Follow
steps
1-3 as shown on
page
39.
?
Use v /
V
to select a timer
recording.
?
Press ENTER to edit the selected
program.
Timer Record menu
appears.
?
Press CLEAR to delete the selected
program
from the Timer Record List.
Canceling
a Timer
Recording
You can clear a timer
setting anytime
before the record-
ing actually
starts.
?
Usev/Vtoselectaprogramyouwanttoeraseon
the Timer Recorder List. If
you
want to erase the
program, press
CLEAR.
Stopping
a Timer
Recording
in
Progress
After a timer
recording
has
started,
you
can still cancel
the
program.
?
Press POWER.
Timer
Recording Troubleshooting
Even
though
the timer is
set,
the
recorder will
not
record when:
?
There is no disc
(or tape)
loaded.
?Anon-recordable disc
(or tape)
is loaded.
?
Disc Protect is set to ON in the
Setup
menu
(see page 26).
?
Power is turned on.
?
There are
already
99 titles
(DVD-RW, DVD-R)
or 49
titles
(DVD+RW, DVD+R)
recorded on the disc.
You
cannot enter
a
timer
program
when:
?Arecording
is
already underway.
?
The time
you're trying
to set has
already passed.
?
There are
already
16 timer
programs
set.
If
two
or more
timer
programs overlap:
?
The earlier
program
takes
priority.
?
When the earlier
program
finishes,
the later
program
starts.
?
If two
programs
are set to start at
exactly
the same
time,
the
program
entered first takes
priority.
If the disc is
damaged,
the
recording may
not
complete
successfully.
In this case even
though
the Check field
shows "Rec.
OK",
it
may
not be.