ENGLISH RC389H P/N0: MFL57156213
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Copyrights Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. This product incorporates copyright protection technology that is protected by method claims of certain U.S.
Contents Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-12 Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Auto setup . . . . . . . . . . . . . . . . . . . . .
Before you start Recordable and Playable discs This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
Notes on discs Restrictions on copying Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Some video material is copy-once protected: Such material cannot be copied to Video tpe or DVD. You can identify copy-once protected material during playback by displaying disc information on-screen. Do not attach any seal or label to either side (the labelled side or the recorded side) of a disc.
Remote control a POWER: Switches the unit ON or OFF. DVD: Selects the unit’s mode to DVD. VCR: Selects the unit’s mode to VCR. EJECT, OPEN/CLOSE: Opens and closes the disc tray, and eject the tape in the VCR deck. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a mark on the Marker Search menu. AV/INPUT: Changes the input source (Tuner, AV1-2, or DV IN).
Main Unit a b c d e f g h i /I 2 j kl m n a 1/I Switches the unit ON or OFF. b Disc Tray Insert a disc here. c DVD (Z) Opens or closes the disc tray. d Display window Shows the current status of the recorder. e Remote Sensor Point the remote control here. f USB Port Connect a USB Memory Stick. g DV IN Connect the DV output of a digital camcorder. h AV IN 2 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Hooking up the unit a Antenna connection Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. c Audio/Video connection Connect one end of the video(yellow) cable to the VIDEO OUTPUT jack on the unit and other end to the VIDEO INPUT jack on your TV. Connect one ends of the audio cables (red and white) to the analogue AUDIO OUTPUT jack on the unit and other ends to the AUDIO INPUT jack on your TV.
Hooking up the unit - more you can do Component connection Connect one end of the component(Y PB PR) cable to the COMPONENT OUTPUT jack on the unit and other the end to the COMPONENT INPUT jack on your TV. Connect one end of the audio cables (red and white) to the analogue AUDIO OUTPUT jack on the unit and other end to the AUDIO INPUT jack on your TV. Digital audio connection Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other equipment with a digital input.
HDMI connection If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 16). To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs. If there is noise or lines on the screen, please check the HDMI cable. Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again.
Connecting to the AV IN 2 Jacks Operating USB Flash Drive Connect the input jacks (AV IN 2) on the unit to the audio/video out jacks on your accessory component using audio/video cables. ON REMOTE 1. Insert an USB Flash Drive to the USB port: – 2 Displays the HOME menu: HOME 3 Select a main option: bB [MUSIC], [PHOTO] or [MOVIE] option 4 Select the [USB] option: vV 5 Displays corresponding menu list: ENTER For details of operations on each files, refer to relevant pages.
Auto setup When the first time to turn on the unit, the initial setup wizard sets the language, clock and channels automatically. ON REMOTE 1 Turn on the unit The initial setup wizard appears on the screen.
Using the Home Menu Adjust the SETUP settings Setup ON REMOTE Start – Displays SETUP menu. (page 14-18) MOVIE 1 Displays the HOME menu: HOME 2 Select the [Setup] option: bB 3 Select the [Start] option: ENTER 4 Select a desired option on the first level: vV 5 Move to second level: B 6 Select a desired option on the second level: vV 7 Move to third level: B USB – Displays [Movie List] menu on the USB Flash Drive.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 15 Adjust the SETUP settings Adjust the general settings Power Save mode – Selects whether this unit is in power save mode when the power is turned off. This option is not available when a timer recording is set. [ON]: The front panel display is off and only signals arriving at the antenna input are passed through when the unit is turned off. [OFF]: Turns off the [Power Save Mode]. Factory Set – You can reset the unit to all its factory settings.
Adjust the language settings Sampling Freq. (Frequency) – Selects the sampling frequency of the audio signal. [48 kHz]: In case of DVD with 96KHz sampling, Output is converted to 48kHz. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. [96 kHz]: The digital audio signals are output in their original sampling format. DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 17 Adjust the recording settings Adjust the disc settings Disc Record Mode – Select the picture quality for recording from XP, SP, LP, EP or MLP. See recording time of each mode on page 34. Initialize – You can Initialize a DVD by pressing ENTER while [Start] is selected. The [Initialize] menu appears. The unit starts formatting after confirmation. You can select a mode between VR and Video for DVD-RW discs.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 18 Before finalizing, check the characteristics between the disc type in the table below. The finalized DVD-RW discs can be unfinalized so that the disc can be edited or recorded to again. -RW +R +RW RAM -R Once you finalize a disc, you can not edit or record anything on the disc. Discs are automatically finalized when removed from the unit. The edited contents are playable on DVD+RW compatible players only after finalization Finalization is not needed.
Moving to another title/track/file DVD ALL Displaying information while watching TV DivX When a disc has more than one title, you can move to another title. Press DISPLAY twice during playback then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number. Starting playback from selected time DVD ALL During viewing the TV, Press DISPLAY to display the information displayed on-screen. a b c DivX Press DISPLAY twice during playback.
Hearing a different audio TAPE Play a Tape ON REMOTE Press AUDIO then sets tape audio to HIFI, LEFT, RIGHT or NORMAL. Use b/B buttons to select tape audio you want. 1 Press VCR to control the VCR deck: VCR CCounter Memory Function TAPE 2 Insert a prerecorded video tape: - 3 Starts playback: N) PLAY (N This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.
Skip to the next/previous chapter/track/file DVD ALL ACD MP3 WMA Watching a enlarged video image DivX Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file. Pause a playback DVD ALL During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press CLEAR to exit.
Notice for displaying DivX® subtitle Playing DivX® movie files ON REMOTE If the subtitle does not display properly, press PAUSE/STEP when the subtitle appears. Then press and hold SUBTITLE about 3 seconds to display the language code menu. Use b / B to change the language code until the subtitle is displayed properly. Press PLAY (N) to continue playback.
Playing music in random order Listening to music ON REMOTE When you select the [RANDOM] option on the Music List menu then press ENTER, the unit automatically begins random playback and “RANDOM” appears on the menu screen. To return to normal playback, select [Random] option again then press ENTER.
Viewing photo files as a slide show Viewing a photo ON REMOTE 1 Displays the HOME menu: HOME 2 Selects a [PHOTO] option: bB 3 Selects an option that contains photo file: v V ENTER 4 Selects a photo from the menu: vVbB 5 Displays the selected photo in full screen: PLAY 6 Returns to the Photo List: STOP Viewing a photo Photo List menu options Select which file/track you would like to show from the menu and press ENTER. A menu appears on the left side of the screen.
Setting a timer record Recording Follow the instruction below to record a TV channel or other source. The recording continues until the media is full or you stop the recording. This unit can be programmed to record up to 16 timer recordings within a month. The clock must be set correctly before setting a timer record. ON REMOTE HOME 1 Selects a recording mode: You can select a recording mode on the SETUP menu.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 26 Timer Recording Troubleshooting Even though the timer is set, the unit will not record when: – There is no disc (or tape) loaded. – A non-recordable disc (or tape) is loaded. – [Disc Protect] option is set to [ON] in the Setup menu (see page 18). – The unit is in operating (recording, deleting etc.). – There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R, DVD+RW) recorded on the disc.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 27 Before editing Editing a title Using the Title list menu, you can edit video contents. ON REMOTE 1 Displays a [Title List] menu: DISC MENU/LIST 2 Selects a title you want to edit: vVbB 3 Displays an editing menu: The options differ depending on the media type. ENTER 4 Selects a menu option: v V b B, ENTER 5 Exit the [Title List] menu: RETURN Editing a title About title list menu Press DISC MENU/LIST to display the Title List menu.
RC389H-W_BSRSLK 1/31/08 Chapter search -RWVR 10:49 AM -RWVideo +RW Page 28 +R -R RAM You can select the start of a title by searching a chapter. Select a title that you want to search and press ENTER. Select [Chapter] in the [Search] option from the menu on the left of the screen, and press ENTER to display the [Chapter List] menu. Time search -RWVR -RWVideo +RW +R -R RAM You can select the start time of a title by searching time. Select a title that you want to search and press ENTER.
RC389H-W_BSRSLK 1/31/08 Protect a title -RWVR 10:49 AM +RW +R Page 29 RAM Use this function to protect a title against accidental recording, editing or deleting. Select a title you want to protect and press ENTER. Select [Protect] option from the menu on the left and press ENTER. The lock mark will appear on the title thumbnail. Naming a title When a title is recorded by this unit, the title will be named by a number. You can change a title name by using this function.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 30 Overwriting +RW You can overwrite a new video recording on a recorded title that is not protected. Select the TV channel or input source you want to record. Press DISC MENU/LIST to display the Title List menu. Use v V b B to highlight a title you want to overwrite and then press REC to start overwrite. To stop the recording, press STOP.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting General The power does not turned on. b Plug the power cord into the wall outlet securely. There is no picture. b Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. b Connect the video connection securely. b Check the [Video Output Format] in SETUP menu is set to the appropriate item that conforms to your video connection. Picture noise appears. b You are playing a disc recorded in a colour system that is different from your TV.
Stereo Audio Record and/or Playback is not present. b TV is not Stereo-compatible. b Broadcast program is not in stereo format. b The A/V Output jacks on the unit are not connected to TV A/V In jacks. HDMI The connected HDMI device does not display any picture. b b b b Try disconnecting then reconnecting the HDMI cable. Try switching the power of the HDMI device off then back on. The video input of the connected device is set correctly for this unit.
RC389H-W_BSRSLK 1/31/08 10:49 AM Page 34 Specifications Playback Frequency response General Power requirements Power consumption Dimensions (approx.) Net weight (approx.) Operating temperature Operating humidity Television system Recording format AC 110-240V, 50/60 Hz 23W 430 X 78.5 X 260 mm (w x h x d) without feet 4.
